How can we assist you?
Aluminum Crucible
Crucibles for Thermal Analysis Crucibles serve as containers for samples during thermoanalytical measurements. They guarantee that the sensor is n...
Choosing the right crucible guarantees the best results
We offer a wide variety of crucibles that serve as sample containers for thermoanalytical measurements.
The type of crucible used for a measurement can have a significant effect on the quality of the results obtained and can also influence important characteristics of the DSC signal.
Aluminum crucibles with lids can be hermetically sealed.
High quality crucibles for the best thermal analysis results
- Large volume – increases the sensitivity
- Low mass – pushes the resolution to the limit
- Purity – eliminates interaction between the sample and the crucible
- Material – guarantees high thermal conductivity and form stability
- Flatness – ensures perfect thermal contact and no artifacts
Recommended for:
Aluminum is the standard DSC crucible material up to 640°C. For solids, liquids and powder samples and excellent DSC performance.
Detailed information:
The standard type (27311) of pan for DSC measurements – is very shallow (low in height) and has a strong flat base (this ensures that temperature gradients are as low as possible).
Light aluminum pans (51119810) give the shortest signal time constant. This pan is particularly suitable for measuring polymer films, disks and powders.
The 25 uL aluminum crucible (30085850) is optimized for enthalpy measurements which aim to achieve the best possible reproducibility.
Subscribe for the TA eNewsLetter
Thermal Analysis Knowledge – Quarterly News on Applications, Webinars, Courses and How-to-Videos
⭢ Thank you for subscribing. You will receive your newsletter shortly.
⭢ There was a server error. Please try again later.
Products and Specs
Products and Specs
Filter:
Set filter
Clear AllQuantity
Volume μL
Pin
Lid
Sealing tool
Material No.: 00026763
Quantity100
Volume μL40
Pinwithout
Lidwith
Sealing toolA2
Suitable forDSC/TGA/sample robot
Material No.: 00027331
Quantity100
Volume μL40
Pinwith
Lidwith
Sealing toolA2
Suitable forDSC
Material No.: 51119870
Quantity400
Volume μL40
Pinwithout
Lidwithout
Sealing toolA2
Suitable forDSC/TGA/sample robot
Material No.: 51119810
Quantity100
Volume μL20
Pinwithout
Lidwith
Sealing toolA1
Suitable forDSC/TGA/sample robot
Material No.: 30085850
Quantity100
Volume μL25
Pinwithout
Lidwith
Sealing toolA2
Suitable forDSC/TGA/sample robot
Material No.: 00027811
Quantity40
Volume μL160
Pinwith
Lidwith
Sealing toolA2
Suitable forF/TGA
Material No.: 51119872
Quantity400
Volume μL100
Pinwithout
Lidwithout
Sealing toolA2
Suitable forDSC/TGA/sample robot
Comparison
Documentation
Brochures
Thermal analysis is a well-established analytical method that is widely used in many different fields. It provides laboratories with valuable results...
Crucibles serve as containers for samples during thermoanalytical measurements. They guarantee that the sensor is not contaminated by the measurement....
Datasheets
The sensor is the heart of any DSC measuring cell. Ideally a modern DSC sensor should be very sensitive, have a fast response, a baseline that is abso...
The high-pressure DSC-CL combination has the potential to replace the traditional timeconsuming oven aging tests in the prescreening phase of novel po...
The system provides images of samples at predefined temperature or time intervals. A further evaluation possibility is to quantify color differences b...
The photocalorimeter accessory is used in combination with the METTLER TOLEDO DSC 1 or DSC82xe and extends the application possibilities of DSC into t...
Aug 27, 2020
Aug 27, 2020
Aug 28, 2020
Sep 24, 2020
Oct 29, 2020