2-電極 與4-電極電導率感測器 - 總覽 - 梅特勒托利多
2-電極 與4-電極電導率感測器

2-電極 與4-電極電導率感測器

用於準確化學濃度控制的多功能探針

2-電極 與4-電極電導率感測器
2-電極 與4-電極電導率感測器


 METTLER TOLEDO 用於工業電導度測量的「高階系列」2-電極與 4-電極探針能提供 CIP 和 SIP 過程當中最高的安全水準。 這些感測器經過專門設計,並且結構牢固,可以承受最嚴格的清洗程式。

這些牢固的感測器還非常適用於化工業和工業廢水的處理。

產品和規格

 
產品和規格
篩選:
設定篩選
清除全部
 
設計
產業別/應用
測量 範圍
瞭解更多
設計
產業別/應用純水與超純水
測量 範圍0.02-10000 µS/cm
電極常數0.1 1/cm (nominal)
溫度範圍 -10...100 °C (14...212 °F)
最大壓力(bar )34 bar (25 °C), 7 bar (95 °C)
最大壓力( psi)500 psi (77 °F), 100 psi (203 °F)
Sensor materialPVDF
O型環,絕緣Viton® (FDA), PEEK (FDA)
Temperature accuracy±0.25 °C at 25 °C
溫度感測器Pt1000
瞭解更多
設計SS316L
產業別/應用純水與超純水
測量 範圍0.02-10000 µS/cm
電極常數0.1 1/cm (標稱值)
溫度範圍 -10...100 °C (14...212 °F)
最大壓力(bar )17 bar (25°C), 7 bar (95°C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor materialSS 316L/1.4435
O型環,絕緣Viton® (FDA), PEEK (FDA)
Temperature accuracy±0.25 °C at 25 °C
溫度感測器Pt1000
瞭解更多
設計SS316L
產業別/應用製藥衛生級設計
測量 範圍0.02-2000 µS/cm
電極常數0.1 1/cm (標稱值)
溫度範圍 -10...120 °C (14...248 °F)
最大壓力(bar )17 bar (25°C), 7 bar (95°C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor materialSS 316L/1.4435
O型環,絕緣PEEK (FDA)
Temperature accuracy±0.25 °C at 25 °C
溫度感測器Pt1000
瞭解更多
設計Ti
產業別/應用純水系統
測量 範圍0.02-10000 µS/cm
電極常數0.1 1/cm
溫度範圍 -10...100 °C (14...212 °F)
最大壓力(bar )17 bar (25 °C), 7 bar (95 °C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor material塗有特氟隆的SS 316/1.4401
O型環,絕緣氟橡膠(FDA),PEEK(FDA)
Temperature accuracy+/- 0.25 °C
溫度感測器Pt1000
瞭解更多
設計316L (電極)
產業別/應用化學、製藥與食品飲料製程
測量 範圍0.02-500 mS/cm
溫度範圍 -20...150 °C (-4...302 °F)
最大壓力(bar )0 ...20 bar at 135 °C0 ...10 bar at 150 °C
最大壓力( psi)0 ... 290 psi at 275 °F0 ... 145 psi at 302 °F
瞭解更多
設計316L
產業別/應用製藥與食品飲料製程
測量 範圍0.02-650 mS/cm
電極常數0.25 1/cm (標稱值)
溫度範圍 -10...140 °C (14...284 °F)
最大壓力(bar )17 bar (25 °C), 7 bar (95 °C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor materialPEEK (FDA)
O型環,絕緣PEEK (FDA)
Temperature accuracy±0.25 °C (25 °C)
溫度感測器Pt1000
瞭解更多
設計SS316L
產業別/應用CIP/SIP 控制與相位分離
測量 範圍0.02-650 mS/cm
電極常數0.25 1/cm (標稱值)
溫度範圍 -10...140 °C (14...284 °F)
最大壓力(bar )17 bar (25 °C), 7 bar (95 °C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor materialPEEK (FDA)
O型環,絕緣PEEK (FDA)
Temperature accuracy±0.25 °C (25 °C)
溫度感測器Pt1000
瞭解更多
設計SS316L
產業別/應用工業廢水
測量 範圍0.02-650 mS/cm
電極常數0.25 1/cm (標稱值)
溫度範圍 -10...80 °C (14...176 °F)
最大壓力(bar )7 bar at 25°C
最大壓力( psi)100 psi (77 °F)
Sensor materialCPVC
O型環,絕緣CPVC
Temperature accuracy±0.25 °C (25 °C)
溫度感測器Pt1000
瞭解更多
設計SS316L
產業別/應用化學濃度測量
測量 範圍0.02-650 mS/cm
電極常數0.25 1/cm (nominal)
溫度範圍 -10...140 °C (14...284 °F)
最大壓力(bar )17 bar (25 °C), 7 bar (95 °C)
最大壓力( psi)250 psi (77 °F), 100 psi (203 °F)
Sensor materialPEEK (FDA)
O型環,絕緣PEEK (FDA)
Temperature accuracy±0.25 °C (25 °C)
溫度感測器Pt1000
比較

文件

型錄手冊

Pure Water Analytics A Step Ahead for Pharmaceutical Compliance
Topics covered in this brochure are: Pharmaceutical Water conductivity and Total Organic Carbon Requirements, instruments that meet USP Purified Water...
Brewing Industry Brochure
This industry brochure highlights the availability of quality solutions for quality brewing.

案例研究

Success Story: INGOLD Products Reduce Waste and Increase Productivity
The InPro3300 ISFET electrode has proven to be the best solution. Since its initial installation, Glanbia Foods has not had to scrap a single batch du...
微流道毛細管電泳 (MCE) 技術
本個案研究揭示了微流道毛細管電泳 (MCE) 技術的優勢,以及它對電廠循環化學品監控的好處。
Pure water fabricator
This case study explains how an Indian pure water fabricator was faced with challenges during a power plant expansion project to meet the plant's qual...
Corrosion in power plants
This case study explains how the National Thermal Power Corporation (NTPC), India's largest power plant company, needed to reduce corrosion while at t...
No More Tears: Durable Chlor-Alkali pH Electrode
This white paper explains: Membrane cell chlorine production, problems with conventional pH electrodes, pNa/pH technology, measurement challenges, plu...

應用

pH Measurement In Low Conductivity Samples
Power plant cycle chemistry guidelines and standards specify narrow ranges of pH to minimize corrosion of highly valuable components. In addition, mak...
UniCond® ISM Sensor Calibrator Meets Pharmacopeia Calibration Requirements
The United States Pharmacopeia (USP), European Pharmacopeia (EP) and all other Pharmacopoeias set strict guidelines for water quality and test equipme...
Power Plant Conductivity Measurement In Water Treatment and Cycle Chemistry
Conductivity measurement throughout a power plant treatment system from raw water to ultrapure water has typically required a variety of sensors to sp...
Key In-line Analytical Measurements in Chemical Manufacturing of APIs
The application notes provide an overview of the in-line analyses of conductivity and turbidity, which are vital parameters in improving and tracking...
Application Note: Optimized Control of Sour Water in Petrochemical Applications
Application Note - Control of sour water without damaging the pH electrode

單張型錄

Data Sheet: Thornton ISM Sensors for M800 and M300 ISM
Digital liquid analysis sensors optimized for pure water treatment.

服務

+886 2 269 59 688
聯絡服務
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.