Cond Sensor 3/4NPT 0.1C Ti/SS 6 VP - Discontinued Product
Discontinued since: Sep, 2021
Optimized Pure Water Measurement.
Two-Electrode Conductivity Sensor
Used with M300, 200CR or 2000 transmitters for highest accuracy conductivity and resistivity measurements.
Chemically resistant materials
Optimum response and chemical resistance with titanium electrodes, Teflon-coated stainless steel fitting and PEEK insulator.
Traceable Calibration
Maximum accuracy assured with individually calibrated and certified cell constant and temperature sensor traceable to ASTM and NIST.
Material No.: 58031233
Services- Cond Sensor 3/4NPT 0.1C Ti/SS 6 VP
Uptime
Support & Repair
Support & Repair
Expertise
Training & Consulting
Training & Consulting
Specifications
Specifications - Cond Sensor 3/4NPT 0.1C Ti/SS 6 VP
| Operating Range (µS/cm) | 0.02 – 2,000 |
| Temperature Sensor | PT 1000 |
| Cell Constant | 0.1 cm-1 |
| Connection | ¾ inchNPT |
| Cable | 1.5 ft (0.5 m) |
| Connector | VarioPin |
| Measurement Technology | Conductive |
| Fitting material | PTFE/SS |
| Insertion length | 132mm |
| Model Family | Analog |
| Hazardous Area Approvals | No |
| Measured Pressure Resistance | 250 psig @ 200 °F (17 bar @ 93 °C) |
| Electrode Material | Titanium |
| Primary Media/Application | Other Industrial Processes Other Water Processes Power Plant Water/Steam Semiconductor Water |
| Hygienic/Biocompatibility Approvals | No |
| Process fitting | ¾" NPTM |
| Cell Constant (accuracy) | ± 1% |
| Electrode Configuration | 2-electrode |
| Measurement Range | 0.02 - 2,000 µS/cm |
| Sensor Material | PTFE/SS |
Documentation
Brochures
The new edition of our Power Industry brochure addresses all areas of power plants where precise water analytics are needed. Get an overview of METTLE...
Datasheets
Digital liquid analysis sensors optimized for pure water treatment.