Cond Sensor 3/4NPT 0.1C Ti 2 ISM

Name: Cond Sensor 3/4NPT 0.1C Ti 2 ISM
Brand: Mettler Toledo

The UniCond 2-electrode conductivity sensor provides an exceptionally wide measurement range due to its advanced built-in circuit. The sensor can be used to measure everything from ultrapure water to brackish water (up to 50,000 μS / cm).

Material No.: 58031404

One Sensor for an Extensive Measurement Range

The digital UniCond sensor reduces equipment inventory by enabling the measurement of an extensive water purity range with a single sensor model.

Superior Measurement Accuracy

The advanced measuring techniques of the UniCond conductivity sensor contribute to superior accuracy over an extended range.

High Accuracy in Pure Water

UniCond exceeds performance of conventional sensors due to built-in measuring circuits and analog-to-digital signal conversion in the sensor head.

Highly Stable Digital Signal

ISM technology converts the conductivity measurement into a highly stable, robust digital signal which is sent to the transmitter, enabling the sensor to quickly respond to minor changes in conductivity.

Fast and Easy Installation

ISM's plug-and-measure feature makes sensor installation fast and easy, since all relevant status and configuration information is stored in the sensor and automatically transferred from the sensor to the transmitter during startup.

Easy Traceability

Identification, calibration and maintenance data is stored in the UniCond sensor, which allows for clear traceability. The sensor meets strict NIST-traceable calibration requirements.

For Most Pure and Ultrapure Water Types

The NPTM fitting on the conductivity sensor is designed for most standard conductivity applications. This makes it suitable for the vast majority of pure and ultrapure water applications.

Specifications - Cond Sensor 3/4NPT 0.1C Ti 2 ISM

Operating Range (µS/cm)	0.02 – 50,000
Temperature Sensor	PT 1000
Cell Constant	0.1 cm-1
Connection	¾ inchNPT
Connector	n/a
Measurement Technology	Conductive
Fitting material	PTFE/SS
Insertion length	34mm
Model Family	UniCond
Hazardous Area Approvals	No
Measured Pressure Resistance	250 psig @ 200 °F (17 bar @ 93 °C)
Electrode Material	Titanium
Measured Pressure Resistance	0 bar – 17 bar
Primary Media/Application	Other Industrial Processes Other Water Processes Power Plant Water/Steam Semiconductor Water
Hygienic/Biocompatibility Approvals	No
Sensor Material	Titanium, 316L SS
Process fitting	¾" NPTM
Cell Constant (accuracy)	± 1% for 0.02-5,000 µS/cm ± 3% for > 5,000 µS/cm
Electrode Configuration	2-electrode
Measurement Range	0.01 - 50,000 µS/cm

Brochures

Optimizing Your Power Plant Chemistry

The new edition of our Power Industry brochure addresses all areas of power plants where precise water analytics are needed. Get an overview of METTLE...

Datasheets

Data Sheet: Thornton ISM Sensors for M800 and M300 ISM

Digital liquid analysis sensors optimized for pure water treatment.

Datasheet: UPW UniCond

Get Your Quote

Cond Sensor 3/4NPT 0.1C Ti 2 ISM

I want to…

Search suggestions