온라인 프로필 관리 및 mt.com 개인 설정
This webinar discusses how to perform safe scale-up of chemical processes and includes a close examination of thermal risks and hazards.
When scaling up a chemical process, the process not only leaves a research environment to enter into a more technical environment, but it is also performed at a larger scale, which strongly affects its behavior in terms of reproducibility. This is because technical equipment is subject to failure and operators are subject to human error. This may result in deviation from the intended conditions and lead into a critical situation even to loss of control.
It is essential to design the process in such a way that maloperations do not affect its safety or its economy. In order to achieve this objective, the design must not only be performed for nominal operating conditions, but also for deviations from these conditions. Such a design requires an appropriate methodology and specific process data. Here the search for deviations, as it is practiced in the frame of risk analysis, delivers a practical tool in asking questions like “What if?”.
The data required to answer such question can be obtained from dedicated experiments using calorimetric and thermo analytical methods. These experimental techniques allow studying the process under deviating conditions, but require a strong chemical engineering background in order to predict the process large scale behavior. The combination of search for deviation, experimental investigation and engineering skills in the assessment allows a successful scale-up.
스위스 안전보안진흥 비영리 연구소의 Francis Stossel 교수는 묻습니다. 귀하의 공정은 오작동에 견딜 수 있습니까? 반응의 발열 속도를 처리할 만큼 냉각 능력이 충분합니까? 최악의 시나리오를 예측하는 것은 개발을 가속화하고 생산 현장에서의 재앙을 피하기 위해 매우 중요합니다. 그의 강연인 「규모 확대 시 사고 방지」에서 Stossel은 RC1 반응 열량 측정 데이터를 사용해 중요한 열역학 정보를 평가합니다. 단열 온도 상승은 반응열과 열용량의 비율을 구하면 쉽게 계산할 수 있습니다. 두 값 모두 반응 열량계에서 측정할 수 있습니다. 따라서 온도 상승은 방출된 에너지에 비례하며, 그 결과 사고의 심각성을 나타내는 지표로 사용할 수 있습니다. 이러한 이해를 바탕으로 화학자와 엔지니어는 냉각 실패가 발생했을 때 비상 상황이 어떻게 전개될지 예측하고, 안전을 고려하여 공정 자체를 재설계할 수 있습니다. RC one 데이터를 사용하면 심각도, 2차 반응 발생 가능성, 위험도 등급을 평가하고 약점이 무엇인지 파악하여 이에 대한 조치를 취할 수 있습니다. 그렇다면 반응의 위험도를 어떻게 식별하고 약점을 극복할 수 있을까요? 냉각 실패 시나리오와 위험도 등급은 공정과 관련된 열적 위험을 평가할 수 있게 해줍니다. RC1 데이터는 필요한 안전 조치를 선택하고 설계하는 데 도움을 주어, 공정이 오작동에 강해지도록 만듭니다. 화학 공정이 안전하다고 간주되기 전에 답해야 하는 다섯 가지 질문에 대해 더 알아보세요. mt.com slash scaleup dash webinar를 방문하십시오.

Prof. Francis Stoessel
Head - Process Safety Consulting, Institute of Chemical and Biological Process Science, Swiss Federal Institute of Technology Lausanne (EPFL)
Professor Francis Stoessel is Head of Chemical Process Safety Consulting in the Swissi Process Safety GmbH. After graduating in Chemical Engineering from the Universite de Haute Alsace, he spent most of his career working for Ciba-Geigy in their Chemical Engineering Department. He was Head of the Thermal Safety Department at Ciba, later of Process Safety Consulting at Novartis. He then took up a professorship at the Swiss Federal Institute of Technology at Lausanne. Prof. Stoessel has received awards from the Swiss Expert Commission for Safety in the Chemical Industry and the Swiss Society for Thermal Analysis and Calorimetry.