Cond Sensor 1.5Tri 4E SS PEEK ISM
4-Electrode Conductivity Sensor.The UniCond 4-electrode conductivity sensor provides an exceptionally wide measurement range due to its advanced built-in circuit. The sensor can be used to measure from pure water to acid or base solutions.
One Sensor for an Extensive Measurement Range
The digital UniCond sensor reduces equipment inventory by enabling the measurement of an extensive water purity range with a single sensor model.
Superior Measurement Accuracy
The advanced measuring techniques of the UniCond conductivity sensor contribute to superior accuracy over an extended range.
High Accuracy in Pure Water
UniCond exceeds performance of conventional sensors due to built-in measuring circuits and analog-to-digital signal conversion in the sensor head.
Material No.: 58031424
Features
Highly Stable Digital Signal
ISM technology converts the conductivity measurement into a highly stable, robust digital signal which is sent to the transmitter, enabling the sensor to quickly respond to minor changes in conductivity.
Fast and Easy Installation
ISM's plug-and-measure feature makes sensor installation fast and easy, since all relevant status and configuration information is stored in the sensor and automatically transferred from the sensor to the transmitter during startup.
Easy Traceability
Identification, calibration and maintenance data is stored in the UniCond sensor, which allows for clear traceability. The sensor meets strict NIST-traceable calibration requirements.
Fitting Meets Hygienic Requirements
The conductivity sensor's tri-clamp fitting makes it suitable for applications with hygienic requirements.
Specifications
Specifications - Cond Sensor 1.5Tri 4E SS PEEK ISM
| Operating Range (µS/cm) | 10 – 1,000,000 |
| Temperature Sensor | PT 1000 |
| Cell Constant | 4-E |
| Connection | 1 - 1/2 inch Tri-Clamp |
| Connector | n/a |
| Measurement Technology | Conductive |
| Fitting material | PEEK |
| Insertion length | 25mm |
| Model Family | UniCond |
| Hazardous Area Approvals | No |
| Measured Pressure Resistance | 70 psig @ 284°F and 200 psi @ 122°F (4.8 bar @ 140 °C and 14 bar @ 50°C) |
| Electrode Material | SS 316L |
| Measured Pressure Resistance | 0 bar – 14 bar |
| Primary Media/Application | Other Industrial Processes Other Water Processes Pharmaceutical Waters Pharmaceutical/Life Science Production Wastewater |
| Hygienic/Biocompatibility Approvals | Yes |
| Sensor Material | PEEK (FDA), 316L SS |
| Process fitting | 1½" Tri-Clamp |
| Cell Constant (accuracy) | ± 4% |
| Electrode Configuration | 4-electrode |
| Measurement Range | 10 - 1,000,000 µS/cm |
Documentation
Brochures
The new edition of our Power Industry brochure addresses all areas of power plants where precise water analytics are needed. Get an overview of METTLE...
