Transmitter M100 2H DR

Name: Transmitter M100 2H DR
Brand: Mettler Toledo

The M100 DR is a DIN rail-mounted, single-channel, 2-wire process transmitter that supports multiple parameters and HART communication. It's compatible with pH/ORP, pH/pNa, DO, and conductivity sensors

Material No.: 30127720

Low Installation Cost

M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.

Predictive Maintenance

Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.

Plug & Measure Operation

With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.

Small Footprint

The M100 DR is designed to be DIN rail mounted. It's suitable for 35 mm-wide DIN rail systems, and gives you the functionality that you require for control, without a local display.

Integration & Control via HART

The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.

Easy-to-Analyze Indicators

The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status as well as to communicate alarms and warnings visually to on-site maintenance staff.

Specifications - Transmitter M100 2H DR

Parameter(s)	Conductivity Dissolved Oxygen ORP pH
Sensor Type	ISM
Current Output(s) Digital Output	1 x 0/4-20mA
Analog Inputs	1
Inputs (2)	1
Communication	HART
Hazardous Area Approvals	No
Approvals and Certificates	CE compliant
Wired Mode	2-Wire
Power Supply	14-30 VDC
User Interface	None
Relay Contact(s)	None
PID Controller	None
Channels	1
Enclosure Material	PA-FR
Protection Rating	IP20
USB Interface	No
Size	DIN Rail
Primary Media/Application	Chemical Processes Other Industrial Processes
Model Family	M100

Datasheets

Data Sheet for M100 DIN Rail Transmitter

DIN Rail transmitter, high performance and minimal space requirement.

Technical Specifications

Technical Data: M100 DR DIN Rail Transmitter for pH/ORP, pH/pNa, Oxygen and Conductivity

The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...

Manuals

Operating Instructions: DIN Rail Transmitter M100 DR

These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...

Quick Setup Guide Transmitter M100

The M100 is a 2-wire head mount transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel, multi-para...

Safety Instructions M100 / M200 / M300 / M400 / M800 Transmitter Series