Browse our product offerings here
Sensor Housings and Sensor Cleaning Frequently Asked Questions (FAQ)
What is a sensor housing?
A sensor housing, also known as a process adaption, is a piece of hardware that allows a sensor to be c...
What is a sensor housing?
A sensor housing, also known as a process adaption, is a piece of hardware that allows a sensor to be connected in-line to a process tank or pipe. It can also allow a sensor to reach the desired depth in an open basin for measurement.
What is a sensor housing used for?
A sensor housing enables an analytical sensor to be installed in-line into a process (tank/pipe). The housing is to ensure the sensor is protected and reaches the desired depth for obtaining optimum analysis results. Various types of housing are available. Typically, a sensor housing can be applied to open basins, flow-through pipes, closed tanks, chemical reactors, bioreactors and fermentation vessels.
What are the different types of sensor housings?
Choosing the correct housing is crucial. The housing must ensure that the sensor is well protected and is able to provide representative measurements.
METTLER TOLEDO has four different sensor housing types, namely:
METTLER TOLEDO sensor housings offer the right solution to ensure production safety, reliability and for legislation requirements.
What should you consider when selecting a sensor housing?
The primary considerations when a sensor housing is selected are:
Can sensor cleaning and calibration be done in the sensor housing?
The InTrac series of housing can be operated with METTLER TOLEDO EasyClean 150 or EasyClean 200 for programmable automatic sensor flushing. It also can be operated with EasyClean 400 for programmable automatic pH sensor cleaning and calibration.
For InDip housings when a high dirt load is foreseen, operation with EasyClean 100 for programmable automatic sensor rinsing is possible.
This reduces plant operator workload for performing manual sensor cleaning and calibration.
What is sensor cleaning?
Sensor cleaning is the routine maintenance that has to be performed on a sensor for it to work at its best.
Why is sensor cleaning important?
Efficient sensor cleaning is important as it prevents fouling of the sensor's diaphragm. Through sensor cleaning the lifespan of the sensor is substantially increased. Sensor cleaning is also important because it further enhances process control and safety, and reduces the maintenance burden. Automatic or manually triggered sensor maintenance allows staff to work on more important tasks. In addition, regular sensor cleaning and calibration ensures sensors perform at their best and last longer.
How do you do sensor cleaning?
Sensor cleaning is best done with METTLER TOLEDO's EasyClean series of automated cleaning systems, which meet the widest range of needs.
What kinds of sensor cleaning devices are available?
METTLER TOLEDO offers the following:
EasyClean 400X for hazardous areas for example in the chemical industry, which requires special equipment.
Proven for sterile conditions and certified following to the EHEDG guidelines.
User-friendly design allows sensor exchange at any time without compromising safety.
Housings which allow continuous monitoring in pipes.