O2 Sen InPro6850iG/12/220/1613311
Advanced Gas-Phase Oxygen Sensor.The InPro 6850iG/12/220/C22 is an amperometric gas-phase oxygen sensor that is suited to a wide measurement range in a broad choice of applications. This sensor uses Intelligent Sensor Management (ISM) diagnostics to reduce maintenance and downtime.
In-Line Gas Phase O₂ Measurement
The InPro 6850iG/12/220/C22 is designed to measure gas-phase oxygen in-line, in harsh environments and hazardous area applications.
Signal Stability & Reduced Maintenance
The 3-electrode system of the InPro 6850iG/12/220/C22 includes a platinum anode that increases signal stability and extends maintenance intervals.
Real-Time Sensor Performance Monitoring
The InPro 6850iG/12/220/C22 uses ISM technology to provide advanced diagnostics, including days until the membrane kit should be replaced.
Material No.: 52206436
Features
Reliable in Harsh Processes
The InPro 6850iG/12/220/C22 offers accurate measurement between 0.1% and 100% oxygen, making it suitable for challenging applications such as off-gas monitoring or inertization in aggressive processes.
Suited to Your Process Needs
To meet the requirements of your specific application, the InPro 6850iG/12/220/C22 is 220 mm long for medium to long length installations. It uses a Kalrez® O-ring with C22 Hastelloy wetted parts for use in acidic gas streams.
Fast Sensor Replacement for More Uptime
The InPro 6850iG/12/220/C22 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process.
Accurate, Quick Measurement
The InPro 6850iG/12/220/C22 responds very quickly to changes in oxygen levels (90% in under 20 seconds), and the membrane is insensitive to dust and moisture. This provides fast, accurate readings in the process stream.
Specifications
Specifications - O2 Sen InPro6850iG/12/220/1613311
| Measurement Parameter | Gas-Phase Oxygen |
| Measurement Technology | Amperometric Clark Electrode |
| Measurement Range | 301 ppm - 100% O2 |
| Accuracy | ≤ ±[1% +0.1 Vol-%] |
| Response Time | T90 ≤ 20s (nitrogen to 15 Vol-% O2 at 25 °C / 77 °F) |
| Primary Media/Application | Chemical Processes Pharmaceutical/Life Science Production |
| ISM (Digital) or Analog | ISM (Digital) |
| Cable Connector | K8S |
| Sensor Length | 220 mm |
| Process Connection | Pg 13.5 |
| Connector Design | Straight |
| O-Ring Material | Kalrez® |
| Sensor Diameter | 12 mm |
| Surface Roughness of Wetted Parts | N5/Ra 16 (Ra=0.4mm/16min) |
| Wetted Materials | C22 Hastelloy |
| Wetted membrane material | PTFE |
| Model Family | InPro6850iG |
| Detection limit | 300 ppm |
| Detection limit | 300 ppm |
| Sensor signal in air at 25 °C (77 °F) | 50...110 nA |
| Residual signal in oxygen free media | <0.1 % of signal in ambient air |
| Temperature compensation | Automatic |
| Measuring Temp. Range | 32 °F – 158 °F (0 °C – 70 °C) |
| Operating Pressure (Bar) | 0.200 bar–9.000 bar |
| Operating Pressure (PSI) | 2.9 to 130 psi absolute |
| Mechanical Temp. Range | 23 °F – 250 °F (-5 °C – 121 °C) |
| Design pressure (bar) | maximum 12 bar |
| Design Pressure (PSI) | maximum 174 psi absolute |
| Hazardous Area Approvals | ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db. FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 * |
| Hygienic/Biocompatibility Approvals | EHEDG, FDA/USP Class VI |
| Other certificates | METTLER TOLEDO Quality Certificate, Material certificate 3.1, N5/Ra 17 |
| Mechanical Temperature Resistance (Celsius) | -5 °C – 121 °C |
| Operating Range | 301 ppm - 100% O2 |
| Intelligent Sensor Management (ISM®) | Yes |
| Measured Pressure Resistance | 0.2 bar – 9 bar |
| Mechanical Temperature Resistance (Fahrenheit) | 23 °F – 250 °F |
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation
Features and Benefits
| Reliable in Harsh Processes The InPro 6850iG/12/220/C22 offers accurate measurement between 0.1% and 100% oxygen, making it suitable for challenging applications such as off-gas monitoring or inertization in aggressive processes. |
| Suited to Your Process Needs To meet the requirements of your specific application, the InPro 6850iG/12/220/C22 is 220 mm long for medium to long length installations. It uses a Kalrez® O-ring with C22 Hastelloy wetted parts for use in acidic gas streams. |
| Fast Sensor Replacement for More Uptime The InPro 6850iG/12/220/C22 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process. |
| Accurate, Quick Measurement The InPro 6850iG/12/220/C22 responds very quickly to oxygen levels changes (90% in less than 20 seconds), and the membrane is insensitive to dust and moisture. This provides fast, accurate readings in the process stream. |
Documentation
White Papers
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters
Accessories
Sensor Calibration & Maintenance Tools
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
Material No.: 52300383
( incl. VAT)
