Watch our videos on how to get started with EasyPlus UV/VIS Spectrophotometers, learn how to perform different measurement methods and how to quickly replace the lamp of an Easy VIS spectrophotometer and more!
EasyPlus UV/VIS spectrophotometers combine conventional spectrophotometry, color measurements, and water analyses within one compact instrument. The spectrophotometers are designed to greatly facilitate your routine spectroscopic workflows, saving bench space and reducing your investment in equipment and service.
Getting Started
Unboxing Your EasyPlus UV/VIS Spectrophotometer
It is easy to get started with the new EasyPlus Spectrophotometers by METTLER TOLEDO, simply:
- Unpack,
- Connect,
- Adjust,
and perform your first measurement in less than 5 minutes!
Installing the SQKitReader Accessory For Spectroquant Water Test Kits
Learn how to easily install the SQKit reader accessory for Spectroquant water test kits on your EasyPlus UV/VIS spectrophotometer from METTLER TOLEDO.
Simply mount the SQKitReader on the magnetic pogo pins of the EasyPlus UV/VIS spectrophotometer and fix it with the included screw. After the initialization, the Spectroquant button appers on the home screen, enabling over 150 water test methods.
Internal Barcode Reader Set SQKitReader
How-to Measure
How to Perform Photometric Measurements with EasyPlus UV/VIS Spectrophotometers?
In this video, you will learn how to easily perform photometric measurements on your EasyPlus UV/VIS Spectrophotometer from METTLER TOLEDO.
You can easily configure and save your own methods directly to the instrument. Visual guidance on the terminal instructs you through the different measurement steps.
How to Perform Scan Measurements with EasyPlus UV/VIS Spectrophotometers?
Take a look at how to easy it is to perform scan measurements on your EasyPlus UV/VIS Spectrophotometer by METTLER TOLEDO.
With the scan method, a full spectrum absorbance or transmittance can be recorded. Peaks and valleys can be detected automatically by the instrument.
How to Perform Quantification with EasyPlus UV/VIS Spectrophotometers?
Performing quantification measurements on your EasyPlus UV/VIS Spectrophotometer by METTLER TOLEDO is simple. They can be performed by two different types of result calculations:
- By an own formula
- Or by a calibration curve, built up by measuring standards
The configuration of both ways is described in detail within this video.
How to Perform Color Measurements with EasyPlus UV/VIS Spectrophotometers?
The Easy UV offers 30 predefined color calculations in the UV and visible wavelength range. For applications only measuring in the visible region, the Easy VIS features 25 color numbers.
In this video, you will learn how to easily perform color measurements on your EasyPlus UV/VIS Spectrophotometer from METTLER TOLEDO.
Configuring a method is very simple, and each method can be adjusted individually and exported to a USB flash drive. Via the normalization parameter, all measured transmittance values can be automatically recalculated to a 10 mm path length.
How to Perform Water Testing with EasyPlus UV/VIS Spectrophotometers?
In this video, you will learn how to easily perform water testing measurements with Spectroquant™ test kits on your EasyPlus UV/VIS Spectrophotometer by METTLER TOLEDO.
In this category, more than 150 predefined methods are available. By scanning the 2D barcode of a test kit with the SQKitReader™ accessory, the corresponding method starts automatically.
How to Use the EasyDirect™ UV/VIS Software?
Learn how to take full advantage of EasyPlus UV/VIS spectrophotometers in this informative video. Connecting your instrument with the user-friendly EasyDirect UV/VIS PC software allows you to streamline your daily workflow and simplify your analysis process.
Join us as we demonstrate the benefits of using this software and guide you through the easy connection process. Make the most of your EasyPlus spectrophotometer with the EasyDirect UV/VIS PC software.
Easy Maintenance
How to Replace the Lamp of Your Easy VIS Spectrophotometer?
METTLER TOLEDO's Easy VIS Spectrophotometer operates within a wavelength range of 330 to 1,000 nm. The light source is an easy-to-replace tungsten lamp, which any operator can quickly replace within just a few minutes! Simply unscrew the screws with the supplied tool, replace the module and close it again.
Easy VIS constantly monitors and records the usage of the lamp and prompts the user to prepare for a replacement in advance. If the Easy VIS detects that the light intensity is below a threshold, it informs the user.
