We support and service your measurement equipment through its entire life-cycle, from installation to preventive maintenance and calibration to equipment repair.
M100 Compact Transmitters
Sensor-Mounted and DIN Rail-Mounted Analytical Transmitters
The M100 is a family of single-channel, multi-parameter transmitters with a compact footprint to simplify installation. This family includes the M100 sensor mount transmitter for bioreactors and the M100 DIN rail transmitter for simple, compact installation. To maximize space, M100 has no on-screen interface. Sensor configuration and viewing of diagnostics are done externally via a PC with iSense software or your plant controller. LEDs on the transmitter display sensor status and alarms.
Clear AllView Results ()
Filter ()
Add 1 or 2 more products to compare
Smallest Footprint for Simplified Installation
The M100 transmitters offer an extremely compact footprint. Either installed directly on the sensor or on a DIN rail, they are optimal for processes where space is limited.
Easily Communicate with the M100 DIN Rail
The M100 multi-parameter DIN Rail transmitter has integrated HART protocol as standard and communicates with major asset management tools, including AMS, PDM and PACTware.
Full Use of ISM Benefits with the M100
The M100 transmitter allows you to take advantage of ISM diagnostics and the Plug and Measure capability. The diagnostics indicate when the connected sensor needs calibrated or replaced.
Simple Plug and Measure Operation
iSense software enables users to calibrate their sensors via a PC and then connect to an M100 transmitter to speed up measurement point commissioning and allow a hot swap of sensors.
Predictive Diagnostics Simplify Maintenance
Advanced sensor diagnostics are available over HART on the M100 DIN rail transmitter or over Bluetooth, Modbus RTU or analog interfaces on the M100 sensor-mount transmitter.
Upgrade Bioreactors to Digital
The M100 sensor-mount transmitters are designed for bioreactors. They allow you to easily integrate digital ISM pH, dissolved oxygen and CO2 sensors directly into the head plate of a bioreactor.
Useful Related Links
Data Sheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO and CO2 or ISM RS485 optical oxygen sensors. Read more
Family Flyer of Intelligent Transmitter Series
METTLER TOLEDO provides tailorable transmitter solutions to meet the requirements of a wide range of applications. The transmitter series cover pH / ORP, oxygen, dissolved carbon dioxide and conductivity measurements. Read more
Data Sheet for M100 DIN Rail Transmitter
The M100 DR is a single-channel, multi-parameter transmitter compatible with ISM 1-wire sensors for measuring pH/ORP, pH/pNa, oxygen and conductivity. Read more
Webinar: Small Footprint Installation for Hazardous Areas
The continuous, real-time information that in situ analyzers provide has huge advantages over lab analyses of grab samples, and in the end leads to much more reliable process control. Read more
Quick Setup Guide Transmitter M100
The M100 transmitter must only be installed, connected, commissioned, and maintained by qualified specialists e.g. electrical technicians in full compliance with the instructions in this Quick Setup Guide, the applicable norms and legal regulations. Read more
Instruction Manuals for Sensor Mount Transmitter M100
The M100 SM is a direct mount transmitter for METTLER TOLEDO ISM® sensors (1-wire sensors or RS485 digital output sensors) for use with analog or digital biocontrollers. Read more
800 METTLER
Call Service Explore our Services - Tailored to Fit your Equipment
Remote Support
Fast intervention and full security with our remote support capabilities.
- On-Site Customer with Mobile Device
- Remote Technician on Computer
Uptime
Support & Repair
Support & Repair
Performance
Maintenance & Optimization
Maintenance & Optimization
Compliance
Calibration & Quality
Calibration & Quality
Expertise
Training & Consulting
Training & Consulting
FAQs
What is an M100?
An M100 is family of single-channel, multi-parameter analytical transmitters The M100 DR (DIN Rail transmitter) can be used for measuring for measuring pH/ORP, dissolved oxygen and conductivity, while the M100 SM (Sensor Mount transmitter) can be used for measuring pH/ORP, dissolved oxygen or CO2. They are designed for METTLER TOLEDO Intelligent Sensor Management (ISM) digital sensors.
How is an M100 mounted?
There are different configurations of M100 transmitter. The DIN rail transmitter is an M100 that is suitable for DIN rail mounting on a 35 mm wide DIN rail system. The M100 sensor-mount transmitter is mounted directly on the head of the sensor via an AK8 or VP8 connection, depending on the model.
How do I configure an M100 if it has no display?
This depends on the configuration of your M100 transmitter. For the M100 DIN rail transmitter, the configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol or 4/20mA analog output. For the M100 sensor-mount transmitter, there is a Bluetooth 4.0 interface as well as two 4/20 mA analog outputs and a digital MODBUS RTU interface.
What ISM features are available on the M100?
The M100 family of analog transmitters allows you to take advantage of all of the features of ISM technology. ISM sensors integrated into an M100 transmitter feature Plug and Measure functionality for fast, easy set-up. Users also have access to ISM predictive diagnostics, including the Dynamic Lifetime Indicator and the Adaptive Calibration Timer.