DO Sensor InPro6050/120 - Overview - METTLER TOLEDO

DO Sensor InPro6050/120

Continuous Control of Wastewater.The InPro 6050 dissolved oxygen sensor provides reliable continuous measurement of dissolved oxygen in water applications, including biological treatment in wastewater.

Designed for Wastewater Applications

The InPro 6050 sensor with automatic temperature compensation is mainly for use in water and wastewater applications under extremely dirty conditions.

Highest Measurement Accuracy

This sensor is based on a proven technology with an integrated thermistor in a rugged plastic sensor body, providing optimum measurement accuracy.

Low Maintenance Requirement

The InPro 6050 dissolved oxygen sensor requires very little maintenance. The sensor membrane is long lasting, and easy to exchange and maintain.

Material No.: 52200851

Call for Quote
Specifications - DO Sensor InPro6050/120
Measurement Parameter
Oxygen
Operating Range
30 ppb - sat.
Measurement Technology
Amperometric/Polarographic
Accuracy
± [1 % + 30 ppb]
Response Time
T98 = <90s
IP rating
IP68
Primary Media/Application
Wastewater
Chemical Processes
ISM (Digital) or Analog
Analog
Sensor Diameter
12mm
O-Ring Material
Viton, Silicone
Process Connection
Pg 13.5
Sensor Length
120 mm
Wetted membrane material
PTFE
Connector Design
VP7
Model Family
InPro6050
Autoclavable/Sterilizable
No
CIP resistant
No
Mechanical Temp. Range
23 °F – 140 °F (-5 °C – 60 °C)
Design Pressure
29 psi (2 bar)
Cable Connector
VP6 analog
Certificates & Approvals
Quality Certificate
Measurement Range
30 ppb - sat.
Residual signal in O2 free media
<0.3% of signal in ambient air
Measuring Temp. Range
32 °F – 140 °F (0 °C – 60 °C)
Detection limit
30 ppb
Connection
VP (IP68)

Rugged Sensor Design

The sensor shaft is of a chemical-resistant polymer material and the industrial watertight VarioPin (IP68) detachable connector is used to simplify cable installation.

Durable and Stable Sensor

The PTFE/silicone membrane is reinforced with an integral stainless steel mesh, providing durability and mechanical stability to ensure continuous measurement. The membrane is PTFE-coated to prevent fouling and protect it from chemical interference.

Accessories

Consumables

Software

Get Your Quote
DO Sensor InPro6050/120
FDA
USP Class VI