Browse our product offerings here
Test Weights for Scales & Balances
METTLER TOLEDO's world leading expertise in metrology extends to test weights, weight sets and weight calibration services. The weight portfolio...
METTLER TOLEDO's world leading expertise in metrology extends to test weights, weight sets and weight calibration services. The weight portfolio covers weights according to OIML or ASTM from fifty micrograms to five tons in all accuracy classes. Our test weights are used all over the world, not only for testing balances but also as primary standards in mass laboratories.
The proprietary electrolytic polishing process for knob and wire weights in the upper class range eliminates microscopic protrusions in the weight’s surface which is far smoother compared to mechanical polishing. Thanks to the enhanced properties of the passive oxide film, long-term stability of the test weight is improved.
Choose from a comprehensive selection of test weights and related calibration services. We offer weights and services of the highest quality – even for users with limited budget. Building on many years of experience and customer feedback, our weight boxes and accessories have an unmatched reputation. Profit from short recalibration times and trustworthy services with our global network of accredited mass laboratories.
Test your balances securely, and in accordance with USP <41>, by using just two test weights to test at 5% and 100% of the capacity of each balance. Not only is this unique approach much faster, but purchasing and recalibration costs are substantially reduced. CarePacs® include tweezers, gloves and other accessories for professional weight handling.
The unique weight identification system "WeightLink™" works with the balance firmware to cross-check the weight against its calibration certificate, making it impossible to test using the wrong weight. With weight parameters transferred electronically to the balance, the system guarantees full traceability thus data integrity is given.
FAQ's on Test Weights
Weights are predominantly needed for adjustment and testing of balances and scales. In metrological terminology, a distinction is made between mass standards and certified weights National regulations and international recommendations define the error limits of certified weights. Weights are classified into tolerance limits which are defined either by OIML or ASTM. The conventional weight value and not the mass is used as the nominal value of the weight. For a high level of accuracy, certified weights are calibrated and traceable back to the IPK (International Prototype Kilogram).
Weight classes are separated according to the error limits that are classified either according to OIML or ASTM declarations.
The OIML weight
The error in a weight used for the verification of a weighing instrument shall not exceed one third of the Maximum Permissible Error for an instrument. These values are listed in section 3.7.1 of OIML International Recommendation 76 Non-automatic Weighing Instruments (1992).
ASTM Class 0, Ultra Class, and OIML Class E1 should be used for the highest level of precision i.e. mass standards (calibrating other weights), micro-balances testing and calibration, and critical weighing applications. ASTM Class 1, 2 and OIML Class E2, F1 should be used for precision applications i.e. analytical balance testing and calibration. ASTM Class 3, 4 and OIML Class F1, F2 are best suited to Top Loading Balance calibrations and testing, and moderate precision applications (laboratory non-critical).
Note: if a balance or scale is calibrated, the weight set used and the class must be documented.
For routine testing, specially-designed CarePacs are recommended and the nominal value should suffice for most process requirements. The tests to be carried out depend on the criticality of the weighing process, i.e. arisk assessment. SOPs are available for test practices.
Stainless steel weights have long-term stability. All Mettler Toledo weights are made of premium stainless steel to make them corrosion resistant. Monobloc weights are specially designed for long-term stability and weights with an adjusting cavity provide the best value for money. Electrolytic polishing ensures glossy surfaces for anti-adhesion effects.
There are two benefits of using brass weights:
Microgram weights were made available by Mettler Toledo in response to increasing customer demands for values below one milligram. Weights are packaged with specially- designed accessory sets and handling tools to provide a complete solution for operators who go beyond traditional boundaries.
These weights are also traceable and therefore have certified values which are necessary for critical applications such as nanotechnology applications. Download the white paper on Micro Weights to lear more.
Traceability of weights used for testing must reference the weight set number and the certificate supplied with the weights will provide traceable calibration data. Care should be taken not to mix up weight sets as traditional weights are not marked.
Mettler Toledo has responded to these challenges by laser printing dot matrix codes on weights and also making available special readers for identifying the weights. The digital “WeightLink” solution allows all calibration data to be integrated into the dot matrix code.
Air density is usually calculated from relevant air parameters such as air temperature, pressure, humidity and CO2 concentration. An alternative method of determining air density may be applied by utilizing two specially-designed buoyancy artefacts. Both artefacts are compared in vacuum and in air. By comparing the two artefacts of identical nominal weight, the large volume difference reflects the air buoyancy and therefore results in a highly-accurate determination of air density. The buoyancy artefacts are mainly used for the M_one Vacuum Mass comparator
Why a sphere?Spheres are used as the volume can be determined according to the definition of volume by a length measurement.
Why silicon? Silicon spheres (Si) have the same homogenous atomic structure as a perfect diamond, without voids or dislocations, so the density is more accurate than other materials.
This is why a silicon sphere with a homogenous atomic structure serves as a reference for specialized volume measurement.
Mass comparators go up to six tons' capacity. Industrial scales go up to several hundred tons. Heavy capacity weights typically in the range of 200kg, 500kg, 1t and 2t are used for sensitivity, eccentricity, linearity and repeatability of these higher-capacity devices. Weights are less than 2t due to the maximum lifting capability of machines, typically forklifts and cranes. However, these weights can be combined to reach the desired weight. Professional weights like MT's have lifting hooks and areas where weights can be lifted by a forklift. Barrel (round weights) are illegal as they roll and could injure a service technician.
Heavy capacity weights must be transported in heavy-duty trucks and it is important to ensure trucks do not exceed their rated load limit due to safety and government regulations. Heavy capacity weights are generally constructed of cast iron not stainless steel due to the cost.
High-grade stainless steel knob and wire weights for balance calibration purposes and reference usage for weight comparisons. (OIML E1, E2, F1)
Stainless steel knob and sheet weights for routine testing to ensure reliable weighing processes. (OIML F1, F2, M1 and ASTM class 1, 2, 3, 4)
WeightLink™ is an innovative weight identification system that guarantees full traceability of your balance tests
Positive Tolerances Only
A far longer life span thanks to guaranteed positive tolerances
Replaced free of charge if found out of assigned OIML tolerance
Vacuum Melted Steel – Highest Material Purity
No dissolved gases and improved oxide cleanliness
Electrolytic Polishing – Best Surface Smoothness
Enhanced properties produce unmatched stability
For improved mass stability
Made in Switzerland – Solid Name, Solid Products
Traditional manufacturing meets new technologies
Cost Savings with CarePacs®
Buy only the recommended weights for routine testing
Time Savings with CarePacs®
Easy, rapid testing approach supported by SOPs
Safe Shipment and Protected Storage
Supplied in a FDA-compliant and easy to clean plastic box
Made Exclusively from Stainless Steel for Longevity
Excellent weight life span right down to the mg range
For optimized adjustment processes
Use weights with unique ID marked as a matrix code on the weight
Secure Balance Testing
Balance firmware validates certificate and weight data before starting balance test
Automatic transfer of weight parameters into balance firmware
Enriched test printout means less manual recording
Balance firmware guides through the testing process
Test weights and artifacts for specific needs such as nominal values in the microgram range, or tailored weights shaped for specific applications.
Stackable stainless steel or cast iron weights for testing of scales with capacities up to several tons. (OIML F1-M3)
For areas where milligram weights are no longer sufficient
Buoyancy and Volume Artifacts
For meeting specialized application needs
As a reference for specialized volume measurement
Service Technician Weights
For sure and productive calibration processes
Save Testing and Lifting
Standardized design for safe stacking and to fit fork lifts
Hoist-friendly design for efficient handling
Suited to Harsh Environments
Designed for heavy-duty operation under challenging conditions
Suited for industries requiring wash-down test equipment