Setting the micrometer. When setting the volume on a pipette, you should always dial down to the desired volume. By dialing down, you ensure better accuracy by reducing the effects of mechanical backlash within the micrometer's mechanism. But when increasing the volume from a lower setting to a higher one, rotate the volume selector knob at least a third of a turn higher than your desired setting. Then slowly dial down to the correct volume.
When setting the micrometer on a pipette, always "dial down" to the desired volume. By doing do, you ensure better accuracy by reducing the effects of mechanical backlash or slippage within the micrometer's gears.
More information on Pipetting Techniques










