In-Line Gas Phase O₂ Measurement
The InPro 6850iG/12/120 is designed to measure gas-phase oxygen in-line, in harsh environments and hazardous area applications.
Signal Stability & Reduced Maintenance
The 3-electrode system of the InPro 6850iG/12/120 includes a platinum anode that increases signal stability and extends maintenance intervals.
Real-Time Sensor Performance Monitoring
The InPro 6850iG/12/120 uses ISM technology to provide advanced diagnostics, including days until the membrane kit should be replaced.
رقم المادة: 52206431
Sensor Length | 120 mm |
Detection limit | 300 ppm |
Measuring Temp. Range | 0 °C – 70 °C |
Mechanical Temp. Range | -5 °C – 121 °C |
Mechanical Temperature Resistance (Celsius) | -5 °C – 121 °C |
Measured Pressure Resistance | 0.2 bar – 9 bar |
Mechanical Temperature Resistance (Fahrenheit) | 23 °F – 250 °F |
Reliable in Harsh Processes
The InPro 6850iG/12/120 offers accurate measurement between 0.1% and 100% oxygen, making it suitable for challenging applications such as off-gas monitoring or inertization in aggressive processes.
Suited to Your Process Needs
To meet the requirements of your specific application, the InPro 6850iG/12/120 is 120 mm long for small to medium length installations. It uses a standard silicone O-ring with 316L stainless steel wetted parts.
Fast Sensor Replacement for More Uptime
The InPro 6850iG/12/120 offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process.
Accurate, Quick Measurement
The InPro 6850iG/12/120 responds very quickly to oxygen levels changes (90% in less than 20 seconds), and the membrane is insensitive to dust and moisture. This provides fast, accurate readings in the process stream.
The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.
Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.
Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.
Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.
رقم المادة: 52300383