Transmitter M100 SM 1-Wire
Tiếng Việt

Transmitter M100 SM 1-Wire

For Analog or Digital Biocontrollers.The M100 Sensor Mount (SM) is a single-channel transmitter for connecting 1-wire ISM pH, DO (amperometric) and CO2 sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.

Straight-forward Connectivity

The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.

Clear Sensor Status Alerts

LEDs clearly indicate sensor status, alarms and warnings to ensure your sensor is working properly.

Easy Sensor Handling

ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.

Material No.: 30365366

M100 Sensor Mount Transmitter 1-Wire
Gọi để được báo giá
Các thông số - Transmitter M100 SM 1-Wire
(Các) tham số
pH

Dòng điện ra
2 x 0/4-20mA
Đầu vào Analog
Không có

0
Truyền Dữ Liệu
Bluetooth
lPhê duyệt cho khu vực nguy hiểm
Không
Phê duyệt và Chứng nhận
Tuân thủ tiêu chuẩn CE
Chế độ có dây
4 dây
Bộ cấp nguồn
24 VDC
Giao diện Người dùng
(Các) Công tắc Rơ-le
Thiết bị Điều khiển PID

1
Chỉ số Bảo vệ
IP67
Giao diện USB
Kích cỡ
Phương tiện truyền thông/ứng dụng chính
Các quy trình công nghiệp khác
Sản xuất dược phẩm/khoa học đời sống
Dòng model
M100 SM

Simplified installation

The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.

Predictive Maintenance

iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.

Error-free Operation

Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.

Electronic Data Management

Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.

Tài liệu

Bảng dữ liệu

Datasheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...

Manuals

Instruction Manuals for Sensor Mount Transmitter M100 SM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
Instruction Manual for the J-Box BTLE Signal Converter
This instruction manual provides a brief information about techinical data, technical specifiations, operating elements(connections and LED messages)...

Phụ tùng

Hiệu Chuẩn Cảm Biến & Công Cụ Bảo Trì

A universal device for connecting both 1-wire and RS485 ISM sensors to a computer running iSense software.

Material No.: 30130631

Hàng tiêu hao

Phần mềm

Nhận Báo giá
Transmitter M100 SM 1-Wire
Hazardous Area
FM Approved
FDA