Design of Experiments (DoE) is a statistical approach to reaction and process optimization that permits the variation of different factors simultaneously with the goal to screen the reaction space for optimum values.
In chemical development, Design of Experiments (DoE) has become a reference method to speed up reaction optimization, since it allows the assessment of a large number of reaction parameters in a small number of experiments. Over the last several years, DoE has been used for the implementation of Quality by Design (QbD) in R&D and manufacturing. In Pharmaceutical QbD, product and process understanding is critical for assuring quality in the manufactured product.
What is the Advantage of Design of Experiments (DoE) in Chemical Development?
The advantage of Design of Experiments (DoE) deployment in chemical development is that multiple input parameters, or "factors", such as temperature, raw material, concentration can be assessed simultaneously to elucidate the conditions at which the product attributes, or "responses", such as yield, selectivity, impurity level reach an optimum value.
Since DoE studies usually require less experimental repetitions, DoE can result in:
Better Process Understanding in Less Time
Shorter Development Cycles in Manufacturing
How Do I Conduct a DoE Study?
In a Design of Experiments (DoE) study, the factors of interest are varied systematically from their lowest to highest value and all possible factor combinations are executed in the same set of experiments.
In a three-factor DoE with two levels (see graph to the right)., the values may be represented in a cube where the corners display the eight test conditions. In a full factorial design, the resulting test conditions are calculated according 23 = 8 test conditions leading to eight distinct results.
The example to the right shows a schematic example of a full factorial design DoE leading to eight distinct test results and potentially one optimum value (e.g. data highlighted in red).
Leveraging Quality Data from Design of Experiments (DoE)
Building Mathematical Functions
The data resulting from a DoE study is used to build mathematical functions that best describe the relationship between the factors and the measured responses. These equations can be first, second, or higher order, depending on how the responses react to changes in the factors.
Mathematical model with γ=response (e.g. yield), and xn=input factors, and βn=function coefficients.
The response (y) can be plotted against one or two input variables (x) to build the so-called Response Surface in two or three dimensions.
Optimal Conditions for DoE & Plotting
Response Surface Methodology
The goal of optimizing a synthetic reaction is to find the maximum value of a function (the optimum), which yields the best desired outcomes. The Response Surface Methodology (RSM) leverages data generated by DoE and visually depicts the dependence of the response (yield) against der three factors (temperature, starting material and catalyst dosing), see example graph. RSM is beneficial to more precisely model the curvature around the reaction optimum. Process chemists are able to get a deeper understanding of a process and identify the region in which the process conditions meet one or more goals, such as yield increase or cost optimization.
With RSM, a large amount of information can be created from a small number of experiments, and reaction and process optimization can be done in less time.
What are the Requirements for DoE Experimental Set-up?
A key requirement in experimental design for DoE is to establish system reliability and reproducibility. This is accomplished by minimizing the risk of measurement errors and precisely controlling all parameters to assure reproducible conditions. In chemical synthesis, the experimental setup needs to assure parameter measurements and control such as temperature, stirring, sampling, and substance dosing are accurate and experiment to experiment reproducibility is high.
In addition, the chosen Design of Experiments (DoE) factors should represent the parameters that have the strongest influence on the experimental outcomes. The parameter range from lowest to highest value should be realistic and needs to cover the widest possible range since extrapolation outside the design space are not permitted in DoE.
In this figure, the EasyMax chemical synthesis reactor follows the set temperature precisely, while the difficult to control round bottom flask shows a control variation of around 27 °K between its minimum and maximum.
Automated chemical synthesis reactors provide better results, leading to more precise Design of Experiments studies.
Limitations of Manual Synthesis Steps
For Quality Design of Experiments (DoE)
To perform quality DoE studies, manual synthesis equipment, including round bottom flasks, have potential limitations:
The precise control of key parameters, such as temperature, stirring, and dosing, within tight constraints is difficult during the reaction
Experiment repeatabilty is compromised
The recording of all reaction parameter variations and analytical results during the experiment is cumbersome and error-prone
Manual reaction sampling to gain reaction data is not reproducible and needs much of operators time
Image reproduced with permission from Caron, Stéphane, and Nicholas M. Thomson. "Pharmaceutical process chemistry: Evolution of a contemporary data-rich laboratory environment." The Journal of Organic Chemistry 80.6 (2015): 2943-2958. Copyright 2015 American Chemical Society."
Peptides are complex molecules synthesized in many steps with numerous possible side reactions. In order to operate such a processes economically, every step must be optimized and result in a yield of at least 98 %.
The goal of the DoE study was to optimize product yield by the systematic variation of fours process parameters: temperature, solvent addition, water, and peptide concentration.
The study shows the importance of the reproducible change and control of the DoE factors such as heating, cooling, and reactant addition as well as the control of experimental conditions (e.g. through consistent mixing of the reaction mass).
To measure and control multiple sets of reaction parameters in DoE with a high level of reliability and repeatability, chemical synthesis reactors have decisive advantages.
Manual DoE studies with more than two factors require a high experimental effort as all parameters need to be monitored simultaneously over a long reaction time. Chemical synthesis reactors help control all parameters precisely, at the same time, resulting in quality DoE results that are recorded and can be easily retrieved for further data processing. Also, the planned reaction recipe via iControl software assures timely adjustments of individual factors according to the DoE protocol, and can be easily reused for subsequent experiments.
Using EasyMax chemical synthesis reactors, every scientist can enjoy unattended experiments with a wider application range suited for DoE studies for quick discoverery of new synthetic pathways.
Design of Experiments Technology
Perfect Functions to Measure DoE Factors
EasyMax chemical synthesis reactors help scientists quickly explore multiple process parameters simultaneously making it a perfect tool for DoE studies. A unique functionality and application set is provided:
Temperature measurements from -40 °C to 180 °C
Liquid Dosing with dosing rates between 1 and 50 mL/min at high accuracy
Automated reaction sampling from suspensions and multiphase reactions with EasySampler
Efficient stirring of all type of reactions to perform mixing studies
Reaction vessel shape cover a volume range from 0.5 mL to 1000 mL
Integration of PAT probes, including ReactIR, ReactRaman, ParticleTrack, and ParticleView to perform data-rich DoE studies
Innovation is challenging when equipment limits experimental possibilities. The complexity of synthetic chemistry increases every day. This white paper discusses how chemists are responding with innovative techniques:
Automated reaction planning and execution
Complete data capture for every experiment
Synthesis tools that solve common experimental problems
To learn how smart synthesis tools combined with lab digitalization capabilities can transform chemical development, download the white paper The Modern Synthesis Lab: A New Workplace for Chemists.
Design of Experiments (DoE) in Industry-Related Publications
Below is a sample of Design of Experiments (DoE) in industry-related publications:
Lucks, Sandra, and Heiko Brunner. "In Situ Generated Palladium on Aluminum Phosphate as Catalytic System for the Preparation of β, β-Diarylated Olefins by Matsuda–Heck Reaction." Organic Process Research & Development 21.11 (2017): 1835-1842.
Monnaie, Didier, Lonza Peptide, Braine, "Fast and Effective Chemical Synthesis and Optimization Supported by Design of Experiments (DoE)" webinar METTLER TOLEDO, 2017.
Van der Eycken Francis, METTLER TOLEDO, "Innovative Techniques to Synthesize Breakthrough Molecules", Whitepaper (2015).
Georgakis, C. (2013). "Design of Dynamic Experiments: A Data-Driven Methodology for the Optimization of Time-Varying Processes." Industrial & Engineering Chemistry Research 52: 12369-12382.
P. M. Murray et al., "The application of design of experiments (DoE) reaction optimization and solvent selection in the development of new synthetic chemistry", Org. Biomol. Chem., 2016, 14 Pages, 2373-2384.
Design of Experiments (DoE) and Process Optimization. A Review of Recent Publications. Org. Process Res. Dev., 2015, 19 (11), pp 1605–1633.
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.