Axle Scale with Axle Vehicle Weighing Solutions | METTLER TOLEDO

Axle Scale and Weighing Solutions

For Chain of Responsibility Compliance

METTLER TOLEDO’s range of axle weighing solutions are engineered to suit a variety of vehicle weighing requirements, from single axle weighing through to dual, tri or even quad axles. Each solution has been designed to capture and accumulate data accurately and efficiently to assist with Chain of Responsibility compliance.

Axle Scale - Vehicle Weighing Solutions

What is an axel scale? METTLER TOLEDO’s range of axle scale solutions are engineered to suit a variety of vehicle weighing requirements, from si...

What is an axel scale?
METTLER TOLEDO’s range of axle scale solutions are engineered to suit a variety of vehicle weighing requirements, from single axle weighing through to dual, tri or even quad axles. Each axle scale solution has been designed to capture and accumulate data accurately and efficiently to assist with Chain of Responsibility compliance. When it comes to axle scales, we are often asked:

What is a Slow Speed Weigh-in-Motion Axle Weighbridge System?
The unique design of METTLER TOLEDO’s weigh-in-motion axle weighing solution can be installed without expensive concrete foundations, considerably reducing your construction costs. The in-ground design makes it easy for vehicles to enter and exit the axle weighbridge without stopping, traveling at a constant speed of less than ten kilometers per hour.

What is a In-Ground Axle Weighbridge System?
The in-ground axle scale from METTLER TOLEDO enables bi-directional entry for easy and efficient vehicle weighing. The structure includes the unequalled reliability of POWERCELL PDX load cells. With their robust, stainless steel construction, POWERCELL PDX load cells provide 100% protection against the forces that can eat into your profits, including extreme temperatures, lightening strikes, water and floods, rodents, and rust and corrosion.

What is a Multi-Deck Axle Weighbridge System?
METTLER TOLEDO’s multi-deck axle scale weighbridge uses multiple independent weighing modules to simultaneously calculate a vehicle’s total gross weight, providing accurate data fast without repositioning the vehicle. By calculating the weight of each axle group, the heavy duty truck axle scales can assist your company with Chain of Responsibility compliance.
The multi-deck weighbridge comes with either a steel or concrete deck and features orthotropic ribs and POWERCELL PDX load cells to provide many years of accurate and reliable weighing.

How can I learn more about axle weighing truck scale solutions?
To learn more, visit the product pages for complete details on every type of axle weighbridge, then request a consultation with one of our vehicle scale experts.


Slow Speed Weigh-in-Motion Axle Weighbridge

The unique design of METTLER TOLEDO’s weigh-in-motion axle weighing solution can be installed without expensive concrete foundations, considerably reducing your construction costs. The in-ground design makes it easy for vehicles to enter and exit the axle weighbridge without stopping, traveling at a constant speed of less than ten kilometres per hour.

Axle Scale
Axle Scale

In-Ground Axle Weighbridge

The in-ground axle weighing solution from METTLER TOLEDO enables bi-directional entry for easy and efficient vehicle weighing. The structure includes the unequalled reliability of POWERCELL PDX load cells. With their robust, stainless steel construction, POWERCELL PDX load cells provide 100% protection against the forces that can eat into your profits, including extreme temperatures, lightening strikes, water and floods, rodents, and rust and corrosion.

Axle Scale
Axle Scale

Multi-Deck Axle Weighbridge

METTLER TOLEDO’s multi-deck axle weighbridge uses multiple independent weighing modules to simultaneously calculate a vehicle’s total gross weight, providing accurate data fast without repositioning the vehicle. By calculating the weight of each axle group, the weighbridge can assist your company with Chain of Responsibility compliance.

The multi-deck weighbridge comes with either a steel or concrete deck and features orthropic ribs and POWERCELL PDX load cells to provide many years of accurate and reliable weighing.

Axle Scale and Axle Weighing Solutions
Axle Scale and Axle Weighing Solutions

Multi-Deck Axle Weighbridge

FeatureSpecification
Deck constructionReinforced concrete or steel construction
Weighbridge width (standard)3 m, 3.4 m
Weighbridge length4 m to 50 m +
Lightning protection (tested)Lightning Technologies tested - 100 000v,
   80 000 A (POWERCELL PDX)
Weighing componentsStainless Steel
Load cellsHi-performance POWERCELL PDX
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Side railsAbove ground solutions only
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

Weigh-in-Motion Axle Weighbridge

FeatureSpecification
Deck constructionSteel construction
Weighbridge width (standard)3.2 m
Weighbridge length0.8 m
Weighing componentsStainless Steel
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Side railsAbove ground solutions only
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

 

 

In-Ground Axle Weighbridge

FeatureSpecification
Deck constructionReinforced concrete or steel construction
Weighbridge width (standard)3 m, 3.4 m
Weighbridge length4.8 m to 50 m +
Lightning protection (tested)Lightning Technologies tested - 100 000v,
   80 000 A (POWERCELL PDX)
Weighing componentsStainless Steel
Load cellsHi-performance POWERCELL® PDX®
Load cell protection classIP68, IP69k; NEMA 6p
Capacity30/50/60/80/100 t
Maximum rated axle load23.5 t tri axle over 1.2 m axle spacing
Operating temperature-60° c to + 50° c (-76° F to 122° F)
Temperature EC/94/EEC-10° c to + 40° c (4° F to 104° F)
Easy access to load cellsYes
Unmanned operationDriver Control Station (DCS)

 

Documentation

Case Studies

Accurate Scales Protect Against Losses
In every country, legal-for-trade laws allow some margin of error when determining the required accuracy of truck scales. To protect against product a...
Optimized Loads Reduce Fuel Use
Sustainability in the world of heavy transport means getting the most out of every load. By utilizing the maximum legal capacity of each truck, compan...
Vehicle Scales Survive Flooding
What would happen to your equipment if your site flooded? A major chemical producer did not know what to expect when they faced a massive flood, and w...
Get Your Quote
Axle Scale and Weighing Solutions

Accessories

Get Your Quote
Axle Scale and Weighing Solutions
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.