Filter Probe Adaption for GPro 500

Filter Probe Adaption for GPro 500

Analyzer for High Particule Content Gas

The filter probe adaption for the GPro 500 is a non-purged probe with a filter covering to prevent measurement interference in high dust or high condensate containing gas streams. It provides accurate and stable measurements in harsh, environments.

Measure in Dusty or wet Gas Streams
The GPro 500 with a filter probe offers stable measurement in applications where particulates typically would affect with a TDL measurement.

No Sampling or Conditioning System
The filter probe works in dusty or wet conditions, without a maintenance-prone sampling and conditioning system. This removes costs and downtime.

No Alignment Necessary
The non-purged filter probe adaption eliminates the alignment challenges of typical TDL analyzers during installation, ensuring fast, easy setup.

 

Filter Probe Adaption for GPro 500
Call for Quote
Specifications - Filter Probe Adaption for GPro 500
Effective path length 200, 400, 800 mm (7.87", 15.75", 31.5")
Gas Measured Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia
Lower Detection Limit Based on analyzer chosen
Short description This process adaption connects to a GPro 500 gas analyzer for installation in high particulate content gas streams.
Process Adaption or Sensor Process Adaption

Features and Benefits


Stable Measurement in Harsh Conditions
The filter probe type adaption for the GPro 500 tunable diode laser gas analyzer enables in situ gas measurement in dusty, high-temperature or high speed gas streams. It can be connected to the full range of METTLER TOLEDO TDL gas parameters for measurement.
Flexible and Consistent Platform
Reduced Lifecycle Maintenance Costs
A major cost of a gas analyzer is its maintenance-prone sampling and conditioning system. The filter probe does not require these systems and includes an integrated blow-out system to clean the filter without direct intervention or system downtime.
Fast, Intuitive Navigation
Simplified Installation & Reduced Costs
Typical TDL gas analyzers require significant planning and effort for alignment during installation in harsh gas streams. This need is removed by the non-purged filter probe process adaption. Eliminating the purging system also saves on utility costs.
Plug and Measure
For Combustion Control Applications
The non-purged filter probe adaption for the GPro 500 offers a unique solution for high dust or high temperature gas streams. Typical applications include flame-out detection using a CO gas analyzer, and combustion control in boilers and incinerators.
Easy Configuration

Documentation

Datasheets

Datasheet: Filter Probe Adaption for GPro 500
The filter probe adaption for the GPro™ 500 is a nonpurged probe with a filter covering to prevent measurement interference in high dust or high conde...

Technical Specifications

Application Notes

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters

Case Studies

Gas Analyzer - Gas Sensor
These highly reliable gas analyzers are designed to provide fast response times for a variety of gases in industrial and chemical processes. Both tuna...
Minimizing Corrosion with Fast, Robust Gas Analysis
Find out in our success story how the GPro 500 is now providing Inovyn with: Greater process confidence, high measurement accuracy, low maintenance co...

Accessories

Get Your Quote
Filter Probe Adaption for GPro 500
FDA
USP Class VI