CarePacs® - 2 weights set from METTLER TOLEDO
CarePacs® - 2 weights set from METTLER TOLEDO

CarePacs®

Perfectly designed for smooth routine testing of balances

 

Efficient, Cost-effective Approach

The science-based global weighing standard, GWP®, states that testing at approximately 5% and 100% of balance capacity is sufficient. Thi...

The science-based global weighing standard, GWP®, states that testing at approximately 5% and 100% of balance capacity is sufficient. This approach saves time and money and applies to all balances in all industries. Specific to pharmaceutical companies, the same methodology is documented in USP General Chapter 41. With just two test weights, the CarePacs® approach reduces the time necessary to spend on routine testing so that laboratory technicians can focus on their weighing tasks.

CarePacs® are available in three different sizes, each with various nominal weights and weight classes to enable testing of balances up to 8 kg weighing capacity. To gain traceability, documented weight calibration results are delivered in calibration certificates with details of conventional mass correction, uncertainty and traceability according to ISO/IEC 17025.


 
CarePacs® Cost Savings Right from the Start
CarePacs® Flexible Testing Approach with 3rd Weights
CarePacs® Affordable, Convenient and Smart
CarePac® Test Weights for USP Compliance
Need Calibration Service?

Products and Specs

 
Products and Specs
Filter:
Set filter
Clear All
 
Content (set up)
OIML Class
Design
Material
Nominal Value
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 1 mg
Material No.: 11123144
DesignSheet
Material316 Stainless steel
Nominal Value1 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123044
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 2 mg
Material No.: 11123145
DesignSheet
Material316 Stainless steel
Nominal Value2 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123045
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 5 mg
Material No.: 11123146
DesignSheet
Material316 Stainless steel
Nominal Value5 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123046
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 10 mg
Material No.: 11123147
DesignSheet
Material316 Stainless steel
Nominal Value10 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123047
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 20 mg
Material No.: 11123148
DesignSheet
Material316 Stainless steel
Nominal Value20 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123048
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 50 mg
Material No.: 11123149
DesignSheet
Material316 Stainless steel
Nominal Value50 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123049
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 100 mg
Material No.: 11123150
DesignSheet
Material316 Stainless steel
Nominal Value100 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123050
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 200 mg
Material No.: 11123151
DesignSheet
Material316 Stainless steel
Nominal Value200 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123051
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Sheet
Material 316 Stainless steel
Nominal Value 500 mg
Material No.: 11123152
DesignSheet
Material316 Stainless steel
Nominal Value500 mg
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design Wire
Material Stainless Steel
Nominal Value
Material No.: 11123052
OIML ClassE2
DesignWire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 1 g
Material No.: 11123153
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value1 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123053
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 2 g
Material No.: 11123154
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value2 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123054
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 5 g
Material No.: 11123155
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value5 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123055
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 10 g
Material No.: 11123156
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value10 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123056
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 20 g
Material No.: 11123157
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value20 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123057
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 50 g
Material No.: 11123158
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value50 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123058
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class
Design Adjusting cavity
Material 316 Stainless steel
Nominal Value 100 g
Material No.: 11123159
DesignAdjusting cavity
Material316 Stainless steel
Nominal Value100 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight for CarePacs®
3rd Weight for CarePacs®
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123059
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 1 g 1, WeightLink™
3rd Weight, 1 g 1, WeightLink™
Content (set up)
OIML Class
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 1 g
Material No.: 30293487
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value1 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 1 g E2, WeightLink™
3rd Weight, 1 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 1 g
Material No.: 30293554
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value1 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 10 g 1, WeightLink™
3rd Weight, 10 g 1, WeightLink™
Content (set up)
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value 10 g
Material No.: 30293490
DesignAdjusting cavity
MaterialStainless Steel
Nominal Value10 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 10 g E2, WeightLink™
3rd Weight, 10 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 20 g
Material No.: 30293558
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value20 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 100 g 1, WeightLink™
3rd Weight, 100 g 1, WeightLink™
Content (set up)
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value 100 g
Material No.: 30293493
DesignAdjusting cavity
MaterialStainless Steel
Nominal Value100 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 100 g E2, WeightLink™
3rd Weight, 100 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 100 g
Material No.: 30293560
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value100 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 2 g 1, WeightLink™
3rd Weight, 2 g 1, WeightLink™
Content (set up)
OIML Class
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 2 g
Material No.: 30293488
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value2 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 2 g E2, WeightLink™
3rd Weight, 2 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 2 g
Material No.: 30293555
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value2 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 20 g 1, WeightLink™
3rd Weight, 20 g 1, WeightLink™
Content (set up)
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value 20 g
Material No.: 30293491
DesignAdjusting cavity
MaterialStainless Steel
Nominal Value20 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 20 g E2, WeightLink™
3rd Weight, 20 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 10 g
Material No.: 30293557
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value10 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 5 g 1, WeightLink™
3rd Weight, 5 g 1, WeightLink™
Content (set up)
OIML Class
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 5 g
Material No.: 30293489
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value5 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 5 g E2, WeightLink™
3rd Weight, 5 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 5 g
Material No.: 30293556
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value5 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 50 g 1, WeightLink™
3rd Weight, 50 g 1, WeightLink™
Content (set up)
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value 50 g
Material No.: 30293492
DesignAdjusting cavity
MaterialStainless Steel
Nominal Value50 g
BoxPlastic box (included)
Calibration CertificateYes
3rd Weight, 50 g E2, WeightLink™
3rd Weight, 50 g E2, WeightLink™
Content (set up)
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value 50 g
Material No.: 30293559
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
Nominal Value50 g
BoxPlastic box (included)
Calibration CertificateYes
CarePac 1000g 1 / 50g 1,WeightLink™
CarePac 1000g 1 / 50g 1,WeightLink™
Content (set up) 1 kg 1 / 50 g
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293471
Content (set up)1 kg 1 / 50 g
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 1000g F2 / 50g F2, WeightLink™
CarePac 1000g F2 / 50g F2, WeightLink™
Content (set up) 1000 g F2 / 50 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293483
Content (set up)1000 g F2 / 50 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 100g 1 / 5g 1, WeightLink™
CarePac 100g 1 / 5g 1, WeightLink™
Content (set up) 100 g 1 / 5 g
OIML Class
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293465
Content (set up)100 g 1 / 5 g
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 100g F2 / 5g E2, WeightLink™
CarePac 100g F2 / 5g E2, WeightLink™
Content (set up) 100 g F2 / 5 g E2
OIML Class E2; F2
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293477
Content (set up)100 g F2 / 5 g E2
OIML ClassE2; F2
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 2000g 1 / 100g 1, WeightLink™
CarePac 2000g 1 / 100g 1, WeightLink™
Content (set up) 2 kg 1 / 100 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293472
Content (set up)2 kg 1 / 100 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 2000g 1 / 200g 1, WeightLink™
CarePac 2000g 1 / 200g 1, WeightLink™
Content (set up) 2 kg 4 / 200 g 4
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293473
Content (set up)2 kg 4 / 200 g 4
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 2000g F2 / 100g F2, WeightLink™
CarePac 2000g F2 / 100g F2, WeightLink™
Content (set up) 2000 g F2 / 100 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293484
Content (set up)2000 g F2 / 100 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 2000g F2 / 200g F2, WeightLink™
CarePac 2000g F2 / 200g F2, WeightLink™
Content (set up) 2000 g F2 / 200 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293485
Content (set up)2000 g F2 / 200 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 200g 1 / 10g 1, WeightLink™
CarePac 200g 1 / 10g 1, WeightLink™
Content (set up) 200 g 1 / 10 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293464
Content (set up)200 g 1 / 10 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 200g 1 / 20g 1, WeightLink™
CarePac 200g 1 / 20g 1, WeightLink™
Content (set up) 200 g 1 / 20 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293463
Content (set up)200 g 1 / 20 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 200g F2 / 10g F1, WeightLink™
CarePac 200g F2 / 10g F1, WeightLink™
Content (set up) 200 g F2 / 10 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293476
Content (set up)200 g F2 / 10 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 200g F2 / 20g F1, WeightLink ™
CarePac 200g F2 / 20g F1, WeightLink ™
Content (set up) 200 g F2 / 20 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293475
Content (set up)200 g F2 / 20 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 20g 1 / 1g 1,WeightLink™
CarePac 20g 1 / 1g 1,WeightLink™
Content (set up) 20 g 1 / 1 g 1
OIML Class
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293469
Content (set up)20 g 1 / 1 g 1
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 20g F1 / 1g E2, WeightLink™
CarePac 20g F1 / 1g E2, WeightLink™
Content (set up) 20 g F1 / 1 g E2
OIML Class E2; F1
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293481
Content (set up)20 g F1 / 1 g E2
OIML ClassE2; F1
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
Carepac 2g 1 / 100g 1, WeightLink™
Carepac 2g 1 / 100g 1, WeightLink™
Content (set up) 50 g 1 / 2 g 1
OIML Class
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293466
Content (set up)50 g 1 / 2 g 1
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 2g E2 / 0.1g E2, WeightLink™
CarePac 2g E2 / 0.1g E2, WeightLink™
Content (set up) 2 g E2 / 0.1 g E2
OIML Class E2
Design One-piece (monobloc); Wire
Material Stainless Steel
Nominal Value
Material No.: 30293479
Content (set up)2 g E2 / 0.1 g E2
OIML ClassE2
DesignOne-piece (monobloc); Wire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 5000g 1 / 200g 1, WeightLink™
CarePac 5000g 1 / 200g 1, WeightLink™
Content (set up) 5 kg 4 / 200 g 4
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293474
Content (set up)5 kg 4 / 200 g 4
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 5000g F2 / 200g F2, WeightLink™
CarePac 5000g F2 / 200g F2, WeightLink™
Content (set up) 5000 g F2 / 200 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293486
Content (set up)5000 g F2 / 200 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 500g 1 / 20g 1,WeightLink™
CarePac 500g 1 / 20g 1,WeightLink™
Content (set up) 500 g 1 / 20 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293470
Content (set up)500 g 1 / 20 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 500g F2 / 20g F1, WeightLink™
CarePac 500g F2 / 20g F1, WeightLink™
Content (set up) 500 g F2 / 20 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 30293482
Content (set up)500 g F2 / 20 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 50g 1 / 2g 1, WeightLink™
CarePac 50g 1 / 2g 1, WeightLink™
Content (set up) 2 g 1 / 100 mg 1
OIML Class
Design One-piece (monobloc); Sheet
Material Stainless Steel
Nominal Value
Material No.: 30293467
Content (set up)2 g 1 / 100 mg 1
DesignOne-piece (monobloc); Sheet
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 50g F2 / 2g E2, WeightLink™
CarePac 50g F2 / 2g E2, WeightLink™
Content (set up) 50 g F2 / 2 g E2
OIML Class E2; F2
Design Adjusting cavity; One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 30293478
Content (set up)50 g F2 / 2 g E2
OIML ClassE2; F2
DesignAdjusting cavity; One-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
Carepac 5g 1 / 200mg 1, WeightLink™
Carepac 5g 1 / 200mg 1, WeightLink™
Content (set up) 5 g 1 / 200 mg 1
OIML Class
Design One-piece (monobloc); Sheet
Material Stainless Steel
Nominal Value
Material No.: 30293468
Content (set up)5 g 1 / 200 mg 1
DesignOne-piece (monobloc); Sheet
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePac 5g E2 / 200mg E2, WeightLink™
CarePac 5g E2 / 200mg E2, WeightLink™
Content (set up) 5 g E2 / 0.2 g E2
OIML Class E2
Design One-piece (monobloc); Wire
Material Stainless Steel
Nominal Value
Material No.: 30293480
Content (set up)5 g E2 / 0.2 g E2
OIML ClassE2
DesignOne-piece (monobloc); Wire
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 200 g 1 / 20 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123100
Content (set up)200 g 1 / 20 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 200 g 1 / 10 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123101
Content (set up)200 g 1 / 10 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 100 g 1 / 5 g
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123102
Content (set up)100 g 1 / 5 g
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 50 g 1 / 2 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123103
Content (set up)50 g 1 / 2 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 20 g 1 / 1 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123106
Content (set up)20 g 1 / 1 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 5 g 1 / 200 mg 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123105
Content (set up)5 g 1 / 200 mg 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 2 g 1 / 100 mg 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123104
Content (set up)2 g 1 / 100 mg 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 500 g 1 / 20 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123107
Content (set up)500 g 1 / 20 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 1 kg 1 / 50 g
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123108
Content (set up)1 kg 1 / 50 g
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 2 kg 1 / 100 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123109
Content (set up)2 kg 1 / 100 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 2 kg 4 / 200 g 4
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123110
Content (set up)2 kg 4 / 200 g 4
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 5 kg 4 / 200 g 4
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123111
Content (set up)5 kg 4 / 200 g 4
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 200 g 1 / 50 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123126
Content (set up)200 g 1 / 50 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 100 g 1 / 50 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123127
Content (set up)100 g 1 / 50 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 50 g 1 / 50 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123128
Content (set up)50 g 1 / 50 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 200 g 1 / 100 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123129
Content (set up)200 g 1 / 100 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 100 g 1 / 100 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123130
Content (set up)100 g 1 / 100 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 500 g 1 / 10 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123136
Content (set up)500 g 1 / 10 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 1 kg 1 / 10 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123137
Content (set up)1 kg 1 / 10 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 2 kg 1 / 10 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123138
Content (set up)2 kg 1 / 10 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 5 kg 4 / 500 g 4
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123112
Content (set up)5 kg 4 / 500 g 4
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (ASTM)
CarePacs (ASTM)
Content (set up) 5 kg 1 / 100 g 1
OIML Class
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123142
Content (set up)5 kg 1 / 100 g 1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 200 g F2 / 20 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123000
Content (set up)200 g F2 / 20 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 200 g F2 / 10 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123001
Content (set up)200 g F2 / 10 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 100 g F2 / 5 g E2
OIML Class E2; F2
Design
Material Stainless Steel
Nominal Value
Material No.: 11123002
Content (set up)100 g F2 / 5 g E2
OIML ClassE2; F2
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 50 g F2 / 2 g E2
OIML Class E2; F2
Design
Material Stainless Steel
Nominal Value
Material No.: 11123003
Content (set up)50 g F2 / 2 g E2
OIML ClassE2; F2
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 20 g F1 / 1 g E2
OIML Class F1; E2
Design
Material Stainless Steel
Nominal Value
Material No.: 11123006
Content (set up)20 g F1 / 1 g E2
OIML ClassF1; E2
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 5 g E2 / 0.2 g E2
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123005
Content (set up)5 g E2 / 0.2 g E2
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 2 g E2 / 0.1 g E2
OIML Class E2
Design One-piece (monobloc)
Material Stainless Steel
Nominal Value
Material No.: 11123004
Content (set up)2 g E2 / 0.1 g E2
OIML ClassE2
DesignOne-piece (monobloc)
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 500 g F2 / 20 g F1
OIML Class F1; F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123007
Content (set up)500 g F2 / 20 g F1
OIML ClassF1; F2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 1000 g F2 / 50 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123008
Content (set up)1000 g F2 / 50 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 2000 g F2 / 100 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123009
Content (set up)2000 g F2 / 100 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 2000 g F2 / 200 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123010
Content (set up)2000 g F2 / 200 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 5000 g F2 / 200 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123011
Content (set up)5000 g F2 / 200 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 200 g F2 / 50 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123026
Content (set up)200 g F2 / 50 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 100 g F2 / 50 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123027
Content (set up)100 g F2 / 50 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 50 g F2 / 50 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123028
Content (set up)50 g F2 / 50 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 200 g F2 / 100 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123029
Content (set up)200 g F2 / 100 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 100 g F2 / 100 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123030
Content (set up)100 g F2 / 100 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 500 g F2 / 10 g F1
OIML Class F1
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123036
Content (set up)500 g F2 / 10 g F1
OIML ClassF1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 1000 g F2 / 10 g F1
OIML Class F1
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123037
Content (set up)1000 g F2 / 10 g F1
OIML ClassF1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 2000 g F2 / 10 g F1
OIML Class F1
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123038
Content (set up)2000 g F2 / 10 g F1
OIML ClassF1
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 5000 g F2 / 500 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123012
Content (set up)5000 g F2 / 500 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up) 5000 g F2 / 100 g F2
OIML Class F2
Design Adjusting cavity
Material Stainless Steel
Nominal Value
Material No.: 11123042
Content (set up)5000 g F2 / 100 g F2
OIML ClassF2
DesignAdjusting cavity
MaterialStainless Steel
BoxPlastic box (included)
Calibration CertificateYes
CarePacs (OIML)
CarePacs (OIML)
Content (set up)
OIML Class
Design
Material
Nominal Value
Material No.: 111230450
Comparison

Documentation

Brochures

Brochure: CarePac® Weight Sets
Ensure Valid Weighing Results with Just Two Weights. Routine testing of your balance helps maintain accuracy in between scheduled calibrations by an a...

Certificates

Production Certificate : Basic Line Weights
This certificate confirms, that Basic Line weights (1 mg – 500 mg sheet and 1 g – 20 kg knob shape) in OIML classes F and M are manufactured following...

Services

800 METTLER (800 638 8537)
Call Service
 
 
 
 
 
 
 
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.