XPE Micro Analytical Balances from METTLER TOLEDO

    XPE Micro-analytical Balances

    Higher capacity for dosing directly into your target vessel.

     

    XPE Micro Analytical SmartGrid. Unique 50 g capacity – weigh directly into tare vessels.

    XPE Micro Analytical balances are the only balances in the world with a hanging weighing pan. With minimal air turbulence in the weighing chamber, stabilization time is reduced and results are faster. XPE micro-analytical balances have motorized doors on both the outer and the smaller inner draft shields. It’s easy to set up one SmartSens sensor to open both sets of doors for when you want to place your tare container on the balance – just wave your hand over it to activate. To keep air disturbance to a minimum for dosing, the other sensor can be used to open just the outer door. Left and right dosing possible.

     
     
    Products and Specs
     
    Maximum Capacity
    Readability
    Minimum Weight (USP), Typical
    Repeatability (Test Weight)
    Linearity ±
    XPE26
    XPE26
    22 g
    1 µg
    1.4 mg
    0.004 mg (1 g)
    0.01 mg
    Material No.: 30105893
    Maximum Capacity22 g
    Readability1 µg
    Minimum Weight (USP), Typical1.4 mg
    Repeatability (Test Weight)0.004 mg (1 g)
    Linearity ±0.01 mg
    Settling Time3.5 s
    Dimensions (DxHxW)487 mm x 322 mm x 263 mm
    Weighing Pan Dimensions (DxW)40 mm x 40 mm
    XPE26DR
    XPE26DR
    22 g/5.1 g
    0.01 mg;2 µg
    2.4 mg
    0.01 mg (1 g)
    0.01 mg
    Material No.: 30105897
    Maximum Capacity22 g/5.1 g
    Readability0.01 mg;2 µg
    Minimum Weight (USP), Typical2.4 mg
    Repeatability (Test Weight)0.01 mg (1 g)
    Linearity ±0.01 mg
    Settling Time2.5 s
    Dimensions (DxHxW)487 mm x 322 mm x 263 mm
    Weighing Pan Dimensions (DxW)40 mm x 40 mm
    XPE56
    XPE56
    52 g
    1 µg
    1.4 mg
    0.004 mg (2 g)
    0.02 mg
    Material No.: 30105904
    Maximum Capacity52 g
    Readability1 µg
    Minimum Weight (USP), Typical1.4 mg
    Repeatability (Test Weight)0.004 mg (2 g)
    Linearity ±0.02 mg
    Settling Time3.5 s
    Dimensions (DxHxW)487 mm x 322 mm x 263 mm
    Weighing Pan Dimensions (DxW)40 mm x 40 mm
    XPE56DR
    XPE56DR
    52 g/11 g
    0.01 mg;2 µg
    2.4 mg
    0.01 mg (2 g)
    0.03 mg
    Material No.: 30105932
    Maximum Capacity52 g/11 g
    Readability0.01 mg;2 µg
    Minimum Weight (USP), Typical2.4 mg
    Repeatability (Test Weight)0.01 mg (2 g)
    Linearity ±0.03 mg
    Settling Time2.5 s
    Dimensions (DxHxW)487 mm x 322 mm x 263 mm
    Weighing Pan Dimensions (DxW)40 mm x 40 mm
    Comparison
     
     
     
     
     
     
     
    Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.