建議搜尋
  • 磅秤
  • ph
  • M300
所有分類
  • 所有分類
  • 產品
  • 支援
  • 專業知識
  • 活動&網路研討會
  • 其他
Filter
案例分享

Advanced Metal Detection

案例分享

for Raw Material Control

Learn more about Zentis

Download the full case study:

Quality at every stage of production

Its main supplier is nature itself. In order to be able to ensure consistently high quality on a permanent basis, Zentis uses a wide-ranging quality assurance system that includes inspection of raw ingredients.

Preventing metal contamination

An important component of these quality controls is the use of metal detection systems from METTLER TOLEDEO as part of a comprehensive Hazard Analysis and Critical Control Point (HACCP) based program to prevent metal contaminants entering the production process.

Incoming goods control

The quality of incoming goods are checked. A Profile Advantage metal detection system inspects raw pineapple chunks from 2-3 kilogram cans. After the cans are opened in an automated process, the pineapple chunks are shaken onto a conveyor belt and immediately guided through the detector.

Removal of metal contamination

If small metal particles have been left in the pineapple from the supplier’s cutting process or the automatic can-opening process, the Profile Advantage detects these foreign bodies and removes the affected product from the production process automatically using a reverse belt reject mechanism. When the belt is reversed, the product infeed from the can-opening system also stops in order to prevent unnecessary product loss.

Offering the highest sensitivity when inspecting ‘wet’ products and a dependable rejection system, the Profile Advantage gives Zentis complete process reliability.

Brand Protection and Compliance

The Profile Advantage uses advanced multi-simultaneous frequency (MSF) technology. This provides increased detection sensitivity for metallic contaminants – in many cases by up to 50 percent (based on ball diameter) compared to conventional metal detection systems when inspecting ‘wet’ products, or those with high salt content, variable temperature, or packed in metallized film.

 

Related Case Studies

Perfect Pizza 的三種技術
Perfect Pizza 的三種技術
聰明結合了三種技術、視覺檢測、金屬檢測和檢重。
網路式產品檢測能帶來最高的生產線效率
網路式產品檢測能帶來最高的生產線效率
為了保持競爭力，Heinrichsthaler 公司不斷最佳化自己的生產設施效率。 五台組合檢重機與金屬偵測系統安裝的目的在於作為熱成型與管狀袋製造機下游的關鍵檢查點。
Kuchenmeister 信賴產品檢測設備
Kuchenmeister 投資於產品檢測解決方案
Kuchenmeister 信賴 METTLER TOLEDO 產品檢測設備檢測其烘培產品應用，已長達 20 年。
使用最新的檢重技術，保證達成正確的填充重量
保證達成正確的填充重量
為了符合德國的成品包裝標準 (即《預先包裝商品法規》(FPVO))，Lugato GmbH & Co. KG 公司選擇使用經官方認可的 METTLER TOLEDO XS40 檢重機。 因為採用這套系統，該公司即可保證他們可以持續地檢查指定的標稱重量，並確保製程快速且順暢地執行。