UserCom | 熱分析小技巧 | |
UserCom 58 | The influence of water in solid materials, Part 2: Interactions measured by TGA-Sorption | more details
|
UserCom 57 | The influence of water in solid materials, Part 1: Fundamentals and sorption behavior | more details
|
UserCom 56 | Calibration and adjustment, Part 4: Delamination | more details
|
UserCom 55 | Calibration and adjustment, Part 3: OIT and OOT applications | more details
|
UserCom 54 | Isothermal calibration and adjustment, Part 2: Heating rate dependence of temperature measurement | more details
|
UserCom 53 | Calibration and adjustment of DSCs, Part 1: Which materials are suitable? | more details
|
UserCom 52 | Moisture content, water content, loss on drying, Part 2: Special possibilities using the TGA | more details
|
UserCom 51 | Moisture content, water content, loss on drying, Part 1: What exactly is meant and how are these quantities determined? | more details
|
UserCom 50 | Measurement of the expansion behavior of materials with a low coefficient of thermal expansion by TMA | more details
|
UserCom 49 | Thermogravimetry and gas analysis, Part 5: TGA-Micro GC/MS | more details |
UserCom 48 | Thermogravimetry and gas analysis, Part 4: TGA-GC/MS | more details |
UserCom 47 | Thermogravimetry and gas analysis, Part 3: TGA/DSC-FTIR | more details |
UserCom 46 | Thermogravimetry and gas analysis, Part 2: TGA-MS | more details |
UserCom 45 | Thermogravimetry and gas analysis, Part 1: Basic principles and overview | more details |
|
UserCom 44 | Curve interpretation Part 7: DMA combined with results from other thermal analysis techniques | more details |
UserCom 43 | Curve interpretation Part 6: Variation of DMA measurement conditions | more details |
UserCom 42 | Curve interpretation Part 5: TMA curves | more details |
UserCom 41 | Curve interpretation, Part 4: TGA measurements | more details |
UserCom 40 | Curve interpretation, Part 3: DSC curves and curves from other thermal analysis techniques | more details |
UserCom 39 | Curve interpretation, Part 2: Variation of heating and cooling rates | more details |
UserCom 38 | Curve interpretation, Part 1: Variation of experimental conditions | more details |
UserCom 37 | Sorption experiments with the TGA/DSC 1 | more details |
UserCom 36 | 高分子聚合物的熱分析應用 Part 6: TMA and DMA of elastomers | more details |
UserCom 35 | 高分子聚合物的熱分析應用 Part 5: DSC and TGA of elastomers | more details |
UserCom 34 | 高分子聚合物的熱分析應用 Part 4: 熱固性聚合物於 TGA 、TMA 以及 DMA 上的應用分析 | more details |
UserCom 33 | 高分子聚合物的熱分析應用 Part 3: 熱固性聚合物於 DSC 上的應用分析 | more details |
UserCom 32 | 高分子聚合物的熱分析應用 Part 2: 熱塑性聚合物於 TGA 、TMA 以及 DMA 上的應用分析 | more details |
UserCom 31 | 高分子聚合物的熱分析應用 Part 1: 熱塑性聚合物於 DSC 上的應用分析 | more details |
UserCom 30 | 實驗室常用分析測量專業用語 Part 2: 測量不確定性 | more details |
UserCom 29 | 實驗室常用分析測量專業用語 Part 1: 真實性、精確度與準確度 | more details |
UserCom 28 | 利用同步熱重熱焓系統測量高溫比熱值 Part 2: 應用 | more details |
UserCom 27 | 利用同步熱重熱焓系統測量高溫比熱值 Part 1: DSC 量測標準步驟 | more details |
UserCom 26 | 如何選擇適當的 DMA 測量方法以及分析方法來量測合成物的模數 | more details |
UserCom 25 | 選擇適當的基線 | more details |
UserCom 24 | 吸收水分溼氣對聚醯胺纖維 6 機械性質的影響 | more details |
UserCom 23 | 如何決定適當的 DMA 實驗測量參數 | more details |
UserCom 22 | 熱分析方法的發展 Part 2: | more details |
UserCom 21 | 熱分析方法的發展 Part 1: | more details |
UserCom 20 | 使用 DSC 降溫測量確認物質特性的優點 | more details |
UserCom 19 | 高的升溫速率於 DSC 量測的應用 ~ 優點與限制 | more details |
UserCom 18 | 使用不同熱分析儀測量玻璃轉移溫度 Part 2: 玻璃轉移溫度的測量 | more details |
UserCom 17 | 使用不同熱分析儀測量玻璃轉移溫度 Part 1: 概述 | more details |
UserCom 16 | DMA曲線解釋 Part 2 | more details |
UserCom 15 | DMA曲線解釋 Part 1 | more details |
UserCom 14 | TMA 曲線解釋 | more details |
UserCom 13 | TMA 曲線解釋 | more details |
UserCom 12 | 解釋 DSC 曲線 Part 2: 持溫的測量 | more details |
UserCom 11 | 解釋 DSC 曲線 Part 1: 動態升溫的測量 | more details |
UserCom 10 | DSC 純度的分析與測定 | more details |
UserCom 9 | 熱分析的低溫校正 | more details |
UserCom 8 | 執行無框式動力學的技巧 | more details |
UserCom 7 | 如何使用熱分析進行比熱的測量 | more details |
UserCom 6 | 熱分析的校正 | more details |
UserCom 5 | 選擇正確的坩鍋於熱分析使用 | more details |
UserCom 4 | 如何適當使用 STARe 軟體的內部資料庫 | more details |
UserCom 3 | 如何利用熱分析對未知樣品進行探討 | more details |
UserCom 2 | 如何選擇熱分析實驗的加熱速率 | more details |
UserCom 1 | Different temperatures | more details |