X39 Series Loose Flow - ภาพรวม - METTLER TOLEDO

X39 Series Loose Flow

Inspection of frozen-formed products.The X39 X-ray system is specifically designed for the inspection of unpackaged frozen-formed products to ensure that your products are free from physical contaminants and product defects.

Achieve outstanding detection levels

Simultaneously detects and rejects physical contaminants in frozen-formed products using our proprietary X-ray software ContamPlus™.

Exceed hygiene requirements

IP69 design ensures the demands of harsh environments are met, using 316 stainless steel for all key product contact areas including the reject flap.

Minimise product waste

The X39 accurately inspects at up to 57 metres per minute, even when the product positioning on the belt varies, maximising uptime and reducing waste.

หมายเลขกำกับผลิตภัณฑ์: 30541252

สอบภามราคา
ข้อมูลจำเพาะ - X39 Series Loose Flow
การปกป้องแบรนด์
ความไวดีเยี่ยมในการตรวจจับโลหะ แก้ว หินแร่ เศษกระดูกแข็ง และยางความหนาแน่นสูง
การปฏิบัติตามกฎข้อบังคับ
สนับสนุน FSMA และมาตรฐาน GFSI ทั้งหมด รวมถึง BRC และ IFS
ใช้งานง่าย
ซอฟต์แวร์ระบบเอ็กซเรย์ประสิทธิภาพสูงช่วยให้ไม่ต้องปรับค่าด้วยตัวเองและลดข้อผิดพลาดจากการตั้งโปรแกรมของผู้ปฏิบัติงาน
ผลิตภาพที่เพิ่มขึ้น
ความไว้วางใจได้ทั่วโลกและการรายงาน OEE
ความเร็วสายพานลำเลียง (ขึ้นกับขนาดผลิตภัณฑ์)
10-57 เมตร/นาที
อุตสาหกรรม
อาหาร
จำนวนแถว
สายพานสูงสุด 7 สายพาน
เครื่องกำเนิดรังสีเอกซ์
หลอดแบริลเลียม 420W, 84kV, 5.0 mA
การปล่อยรังสีเอกซ์
< 1uSv/hr
ประเภทการคัดแยก
ระบบคัดแยกแบบพ่นลมในตัวพร้อมแผงคัดแยกที่มีระบบป้องกันความขัดข้อง
ระบบระบายความร้อน
อุปกรณ์แลกเปลี่ยนความร้อนและปั๊มหม้อน้ำ
แหล่งจ่ายไฟ
208 - 240 Vac, 1 phase, 50-60 Hz, 10 A
HMI
หน้าจอแสดงผล LED แบบสัมผัสขนาด 15.6” (อัตราส่วน 16:9)
ระดับการปกป้อง IP
IP69
ชนิดผลิตภัณฑ์
ยังไม่บรรจุ - แช่แข็ง
อัตราการทำงาน (ขึ้นกับขนาดผลิตภัณฑ์)
สูงสุด 1,800 ppm
อุณหภูมิการทำงาน (เซสเซียส)
5 °C - 40 °C
ความกว้างของเครื่องตรวจจับด้วยรังสีเอ็กซเรย์
800 มม.
การตรวจจับด้วยเลเซอร์
กล้องถ่ายรูปแบบ 3D พร้อมเลเซอร์ในตัว
สายพานลำเลียงของระบบ
สายพานลำเลียง TPU ที่ผ่านการรับรองจาก FDA และ EU ให้สามารถใช้กับอาหาร
เอกสารข้อมูล

Uphold brand integrity

The X39 simultaneously inspects products for mass, dents, holes, edge defects, flakes and product length, width and height, ensuring only conforming products are accepted before continuing the process.

Protect profits

A dual reject system, encompassing a fully integrated multi-air nozzle reject system and scoop device, minimises product waste and saves costs.

Safeguard products at high speeds

The X39 can inspect up to 1,800 products per minute, maintaining a high throughput rate without being restricted by other equipment upstream or downstream.

Maximise uptime

Advanced intuitive software monitors all aspects of the X39; warnings are sounded should the laser or reject nozzles lose accuracy, ensuring a continual flow of high-quality product throughout the production process.

Five-year generator warranty

Minimise your downtime and protect the most valuable and expensive part of your inspection system, the X-ray generator, for 5 years when purchased with a Standard or Comprehensive Care Package.

Global service support

A global network of service experts provides fast remote and on-site support. Our comprehensive service offering helps you to achieve regulatory compliance, the highest performance and maximum uptime throughout the life cycle of your product inspection eq

Enhance production data visibility

Enable the highest levels of regulatory compliance through real-time data collection. ProdX, our PC-based software, constantly monitors and fully documents all production parameters, quality incidents, user interactions and performance verification routines.

เอกสารประกอบ

เอกสารข้อมูล

ดาต้าชีทสำหรับเครื่องเอกซเรย์ตรวจสอบสิ่งปลอมปน X39 | ดาวน์โหลดฟรี
ระบบเอกซเรย์ X39 ออกแบบมาโดยเฉพาะเพื่อตรวจสอบผลิตภัณฑ์แช่แข็งที่ไม่ได้อยู่ในบรรจุภัณฑ์

อุปกรณ์เสริม

สินค้าที่ใช้แล้วหมดไป

Software

รับใบเสนอราคา
X39 Series Loose Flow