Transmitter M100 2H DR

Transmitter M100 2H DR

High Performance with a Small Footprint.The M100 DR is a DIN rail mounted single-channel, 2-wire process transmitter that supports multiple parameters and HART communication. It is compatible with pH/ORP, pH/pNa, DO and conductivity sensors.

Low Installation Cost

M100 DR is an easy-to-commission 2-wire transmitter for installations where space is at a premium.

Predictive Maintenance

Access to ISM predictive diagnostic tools available over HART leads to reduced maintenance and increased process uptime.

Plug & Measure Operation

With iSense software, sensors can be calibrated via a PC or mobile device, then connected to the M100 without the need to recalibrate.

Číslo produktu: 30127720

Zavolajte nám pre individuálnu ponuku
Technické parametre - Transmitter M100 2H DR
Parameter(-re)
pH
Typ senzora
ISM
Aktuálny(-e) výkon(-y)
Analógové vstupy
Digitálne vstupy
1
Komunikácia
HART
Schválené do nebezpečných priestorov
Nie
Schválenia a osvedčenia
Súlad s CE
Káblový režim
Zdroj
Užívateľské rozhranie
Kontakt(y) relé
Žiadny
Kontrola PID kódu
žiaden
Počet kanálov
1
Materiál krytu
PA-FR
Stupeň ochrany
IP20
Rozhranie USB
Rozmer
Primárne médium/využitie
Chemické procesy
Iné priemyselné procesy
Modelový rad
M121

Small Footprint

The M100 DR is designed to be DIN rail mounted. It is suitable for 35 mm wide DIN rail systems, and gives you the functionality that you require for control, without a local display.

Integration & Control via HART

The transmitter configuration and integration of sensor diagnostics into asset management tools is possible thanks to the integrated HART protocol. This ensures maximum compatibility and easy integration.

Easy-to-Analyze Indicators

The M100 DR is outfitted with two LEDs to clearly indicate transmitter and sensor status, and to communicate alarms and warnings visually to on-site maintenance staff.

Documentation

Prospekty

Data Sheet for M100 DIN Rail Transmitter
DIN Rail transmitter, high performance and minimal space requirement.

Technická špecifikácia

Technical Data: M100 DR DIN Rail Transmitter for pH/ORP, pH/pNa, Oxygen and Conductivity
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...

Manuals

Operating Instructions: DIN Rail Transmitter M100 DR
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
Quick Setup Guide Transmitter M100
The M100 is a 2-wire head mount transmitter for analytical measurements with HART communication capabilities. The M100 is a single-channel, multi-para...

Bus Communication Info

Príslušenstvo

Spotrebný materiál

Softvér

Žiadosť o cenovú ponuku
Transmitter M100 2H DR
Hazardous Area
FM Approved
FDA