Upgrade Kit OptiMax HFCal - Prehľad - METTLER TOLEDO

OptiMax HFCal

Turning OptiMax into a Calorimeter.

Upgrade your synthesis workstation

With just a few simple steps you can extend your OM to a powerful reaction calorimeter. The package is Plug&Play and installed in minutes.

Non-scaleable conditions become visible

OptiMax™ HFCal provides you with the answers to bring chemical processes into production quickly and safely avoiding failures at scale

Calorimetry – simple and accurate

Powerful heating and cooling combined with the Plug&Play calorimetry module guarantee the determination of accurate and repeatable heat information

Technické parametre - Upgrade Kit OptiMax HFCal
Dimensions (WxDxH) 120 mm x 40 mm x 170 mm
Precision Heat Transfer Typically +/- 3%
Accuracy and Precision Specific Heat Typically +/-10%
Accuracy Heat Flow Isothermal conditions: ± 3 % to 5 %; Non-isothermal conditions: ± 5 % to 10%; Based on comparison of qr_hf with qc resp. ∫qr_hf with ∫ qc
Calorimetry Type Heat Flow
Objednávkové číslo/čísla 30050150

Dokumentácia

Súvisiace produkty a riešenia

OptiMax 1001 Thermostat
Characterize Processes, Optimize Chemistry
EasyMax 102 Advanced Thermostat system
Improve Process Development
ParticleTrack G400
Study Particle Size and Count in the Laboratory
ReactIR 15  
ReactIR 15 is a Fourier Transform Infrared spectroscopy (FTIR) for in situ reaction monitoring and chemistry understanding. Progressive technology al...

Návod na inštaláciu

Softvér

Aplikácie

Heat Transfer and Process Scale-up
Scaling up a chemical process from lab to manufacturing gives useful results only with accurate heat transfer coefficients. Measuring the jacket and r...
Chemical Process Safety
Chemical process safety focuses on preventing incidents and accidents during manufacturing of chemicals and pharmaceuticals on a large scale. It refer...
Chemical Process Development & Scale-Up
Design Robust and Sustainable Chemical Processes for Faster Transfer to Pilot Plant and Production

Rozšírené informácie o produktoch

Žiadosť o cenovú ponuku
Upgrade Kit OptiMax HFCal

Príslušenstvo

Specifications

Thermostat 
HeatingElectrical
CoolingPeltier
Cooling Performance0°C   35 W 
20°C 65 W
40°C   95 W
Temperature Range-40°C to 180°C (jacket temperature)
Control Modesisothermal and isoperibolic, constant or ramp, reflux, distillation & crystallization
Stirring30 rpm to 1200 rpm
DimensionsThermostat: 388 mm x 414 mm x 539 mm
Power Supply100 V to 240 V AC, 50 Hz to 60 Hz, 1300 VA
OperationiControl software for calorimetric applications
Graphical touchscreen and/or iControl Software
 
  
Reactors 
TypeSingle piece or two piece (with bottom drain valve)
Volume1000 mL
Pressure50 mbar to 1 bar
MaterialDuran® glass
StirrerPitch-blade (glass, Alloy 22)
Anchor (glass, Alloy 22)
Half-moon (PTFE for single piece reactor)
  
Calorimetry 
TypeHeat Flow
Calibration HeaterMax. 20 W
Precision Heat TransferTypically ± 3%
Accuracy and Precision Specific HeatTypically ± 10%
Accuracy Heat FlowTypically ± 3% to 5%, under isothermal conditions
Typically ± 5% to 10%, under non-isothermal conditions
Sensitivity≤0.1 W measured as standard deviation of qr under steady state conditions.
Peak-to-peak noise is ≤ approximately 0.4 W.
  
HFCal Module 
Power and Data InterfaceDirect connection to CAN interface of standard OptiMax,
no additional power supply or PC connection required
Data LoggingVia iControl Software
Dimensions120 mm x 40 mm x 170 mm
  
SoftwareiControl 5.2 or higher required, HFCal license

Spotrebný materiál

Žiadosť o cenovú ponuku
Upgrade Kit OptiMax HFCal
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.