Webinar - Calibration and Qualification of Laboratory Instruments
Webový seminár na objednávku

Calibration and Qualification in Accordance with GMP Requirements

Webový seminár na objednávku

Ensure Accurate Laboratory Results

Calibration and Qualification of Laboratory Instruments
Calibration and Qualification of Laboratory Instruments

Calibration and qualification of equipments and appropriate routine testing in lab are critical for accurate results and regulatory compliance.

60 minutes
English ,

Calibration and qualification and the appropriate level of routine testing are critical to ensuring high-quality results and maintaining GMP and USP compliance. Understand the relationship between these factors to optimize testing and audit-readiness.

Calibration is relevant to everyone. Even the most precise measurement instrument is of little or no use if you cannot guarantee that the reading is accurate, or you are unaware of the measurement uncertainty. The US GMP rule for pharmaceutical manufacturing, 21 CFR Part 211, article 68(a), provides details on calibration of measuring equipment. Similar statements can be found in other regulatory or guidance documents, such as ISO 9001, which emphasizes the traceability to international or national measurement standards. The challenge is to determine how to put these regulations into practice—to be confident that you comply with the requirements without an excessive amount of effort—but without compromising product quality.

This 60-minute webinar will explain all aspects of calibration and qualification of instruments and routine testing necessary to ensure quality and USP and GLP/GMP compliance, with a focus on laboratory weighing instruments.  Equipment qualification (EQ) responsibilities (DQ/IQ/OQ/PQ—design qualification, installation qualification, operational qualification and performance qualification) and their relation to standard operating procedures will also be discussed.

Key Learning Objectives:

  1. Learn how to achieve effective calibration, including determination of measurement uncertainty, in accordance with GMP and USP requirements.
  2. Understand the roles and responsibilities of different parties with regards to qualification processes (EQ/IQ/OQ/PQ).
  3. Recognize the impact of risk-based routine testing on the quality, efficiency and cost-optimization of laboratory weighing processes.

    This webinar will be of interest to:

    • Anyone involved with qualification, testing and calibration of instruments in a GMP regulated laboratory
    • Quality assurance personnel
    • Compliance managers and regulatory affairs managers
    • GMP and CMC consultants, GLP auditors and quality consultants
    • Laboratory managers, laboratory supervisors, and production managers
    • Auditors (internal and external) responsible for assessing laboratory instrument compliance
    Táto stránka nie je optimalizovaná pre Váš prehliadač. Zvážte prosím použitie iného prehliadača alebo upgradujte svoj prehliadač na najnovšiu verziu pre lepšie zobrazenie.