InFit 762e Stationary - Steel
Top-Entry Housing for Large Vessels
The InFit 762e is a stainless steel stationary housing for top-mount applications in larger vessels and reactors. This housing allows for quick and easy installation of 12 mm sensors with Pg 13.5 thread in chemical and pharmaceutical reactors.
Extensive Range of Process Applications
The InFit 762e permits the use of 12 mm pH, ORP, DO, CO2, turbidity and conductivity sensors into a wide range of in-line process applications.
Reliable Design for Hygienic Processes
With its rugged stainless steel finish, the InFit 762e can stand up to harsh industrial environments and meet the most extreme hygienic requirements.
Option for Enhanced Sensor Protection
In order to protect the sensor against abrasive solids in the process medium, the InFit 762e housing offers a surrounding protective cage.
Specifications
Specifications - InFit 762e Stationary - Steel
| Operation | Stationary |
| Sensors Accepted | pH & ORP (12mm); Dissolved oxygen; CO2; Conductivity; Turbidity |
| Wetted Parts | Stainless 316 L / C 22 / Ti |
| Surface Finish | N6 / N8 (Ra 32 / Ra 125) |
| O-Ring | Viton®-FDA; Kalrez® FDA USP VI; EPDM FDA |
| Sensor Fitting | InPro 2000 |
| Temperature Range (Celsius) | 0 – 130 °C |
| Temperature Range (Farenheit) | 32 – 266 °F |
| Pressure Rating (bar) | 0 – 6 bar |
| Pressure Rating (psig) | 0 – 87 psig |
| Insertion Lengths | 400mm - 4000mm |
| Model Family | InFit 76X |
KALREZ and VITON are registered trademarks of E. I. Du Pont de Nemours and Company Corporation
Insertion Length Tailored to Your Needs
The InFit 762e is available in insertion lengths ranging from 400 mm to 4 meters in increments of 50 mm. This enables the selection of a top-entry housing that is suited to your specific vessel's requirements.
Hazardous Area Approvals with InFit 762e
Certifications are available with the stainless steel InFit 762e housing, proving its reliability when used for high performance measurements in the most extreme chemical processes. Hazardous area approvals include both the ATEX and FM certificates.
Connections to Meet Process Requirements
METTLER TOLEDO offers 10 different process connection types for the InFit 762e, including various ANSI connection sizes (2", 3" and 4") and various flange sizes (DN50, DN65, DN80 and DN100).
Documentation
Datasheets
The static insertion housing InFit 763e provides quick and easy integration of pressurized pH / redox electrodes with liquid reference electrolyte int...
When O-rings leak, valves stick, and equipment fails, unplanned downtime to fix this can affect productivity and output. Regular preventive maintenanc...
