Oxygen Sensor InPro 6850iG/12/120/Ka

O2 Sen InPro6850iG/12/120/1611311

Advanced Gas-Phase Oxygen Sensor.The InPro 6850iG/12/120/Ka is an amperometric gas-phase oxygen sensor that is suited to a wide measurement range in a broad choice of applications. This sensor uses Intelligent Sensor Management (ISM) diagnostics to reduce maintenance and downtime.

In-Line Gas Phase O₂ Measurement

The InPro 6850iG/12/120/Ka is designed to measure gas-phase oxygen in-line, in harsh environments and hazardous area applications.

Signal Stability & Reduced Maintenance

The 3-electrode system of the InPro 6850iG/12/120/Ka includes a platinum anode that increases signal stability and extends maintenance intervals.

Real-Time Sensor Performance Monitoring

The InPro 6850iG/12/120/Ka uses ISM technology to provide advanced diagnostics, including days until the membrane kit should be replaced.

Material No.: 52206433

Oxygen Sensor InPro 6850iG/12/120/Ka
Call for Quote
Specifications - O2 Sen InPro6850iG/12/120/1611311
Measurement Parameter
Gas-Phase Oxygen
Measurement Technology
Amperometric Clark Electrode
Measurement Range
301 ppm - 100% O2
Accuracy
≤ ±[1% +0.1 Vol-%]
Response Time
T90 ≤ 20s (nitrogen to 15 Vol-% O2 at 25 °C / 77 °F)
Primary Media/Application
Chemical Processes
Pharmaceutical/Life Science Production
ISM (Digital) or Analog
ISM (Digital)
Cable Connector
K8S
Sensor Length
120 mm
Process Connection
Pg 13.5
Connector Design
Straight
O-Ring Material
Kalrez®
Sensor Diameter
12 mm
Surface Roughness of Wetted Parts
N5/Ra 16 (Ra=0.4mm/16min)
Wetted Materials
316L Stainless Steel
Wetted membrane material
PTFE
Model Family
InPro6850iG
Detection limit
300 ppm
Detection limit
300 ppm
Sensor signal in air at 25 °C (77 °F)
50...110 nA
Residual signal in oxygen free media
<0.1 % of signal in ambient air
Temperature compensation
Automatic
Measuring Temp. Range
32 °F – 158 °F (0 °C – 70 °C)
Operating Pressure (Bar)
0.200 bar–9.000 bar
Operating Pressure (PSI)
2.9 to 130 psi absolute
Mechanical Temp. Range
23 °F – 250 °F (-5 °C – 121 °C)
Design pressure (bar)
maximum 12 bar
Design Pressure (PSI)
maximum 174 psi absolute
Hazardous Area Approvals
ATEX: Ex ia IIC T6 / T5 / T4 / T3 Ga / Gb, Ex ia IIIC T69 °C / T81 °C / T109 °C / T161 °C Da / Db.
FM: IS Cl. I, II, III, Div 1, GR ABCDEFG / T6 *
Hygienic/Biocompatibility Approvals
EHEDG, FDA/USP Class VI
Other certificates
METTLER TOLEDO Quality Certificate, Material certificate 3.1, N5/Ra 17
Mechanical Temperature Resistance (Celsius)
-5 °C – 121 °C
Operating Range
300 ppm - 100% O2
Intelligent Sensor Management (ISM®)
Yes
Measured Pressure Resistance
0.2 bar – 9 bar
Mechanical Temperature Resistance (Fahrenheit)
23 °F – 250 °F
KALREZ is a registered trademark of E. I. Du Pont de Nemours and Company Corporation

Reliable in Harsh Processes

The InPro 6850iG/12/120/Ka offers accurate measurement between 0.1% and 100% oxygen, making it suitable for challenging applications such as off-gas monitoring or inertization in aggressive processes.

Suited to Your Process Needs

To meet the requirements of your specific application, the InPro 6850iG/12/120/Ka is 120 mm long for small to medium length installations. It uses a Kalrez® O-ring with 316L stainless steel wetted parts for broad application coverage.

Fast Sensor Replacement for More Uptime

The InPro 6850iG/12/120/Ka offers an easy-to-change membrane body and ISM Plug and Measure technology. Plug and Measure allows a sensor to be polarized and calibrated away from the process under lab conditions, and then inserted directly into the process.

Accurate, Quick Measurement

The InPro 6850iG/12/120/Ka responds very quickly to changes in oxygen levels (90% in under 20 seconds), and the membrane is insensitive to dust and moisture. This provides fast, accurate readings in the process stream.

Documentation

White Papers

Process Instrumentation
pH/ORP (Redox) Probes, Oxygen, CO₂, Ozone Sensors, Bioburden, Total Organic Carbon, Gas, Sodium, Silica and Chloride/Sulfate Analyzers, Transmitters

Accessories

Sensor Calibration & Maintenance Tools

The DS AK9-RJ12 is a USB cable adaptor for connecting ISM 1-wire sensors to iSense software. This allows pH, DO and CO2 sensors to be evaluated, maintained and calibrated in the workshop or laboratory.

Diagnostics Away From the Transmitter
The iLink module allows you to access all of the diagnostics of your ISM sensors away from the process with iSense desktop software.

Application Profiling Drives Performance
Store application data on iSense and load directly into an ISM sensor. This allows sensors to learn from preceding sensors in the same process.

Easy Access to Paper Free Documentation
The iLink cable allows sensor calibration and adjustment protocols to be generated automatically in iSense and stored in a fully digital database.

Material No.: 52300383

Consumables

Software

Get Your Quote
O2 Sen InPro6850iG/12/120/1611311
Hazardous Area
FM Approved