How to Choose the Right X-ray System
White Paper

How to Choose the Right X-ray System

White Paper

Tips to ensure optimal inspection, smooth installation and maximum operating efficiency

How to Choose the Right X-ray System
How to Choose the Right X-ray System

This White Paper offers manufacturers practical guidance on how to select the most appropriate x-ray machine and reject system for a specific application. It also advises on production line integration, especially where product handling may be difficult, and the incorporation of failsafe design features, which will satisfy most brand, retailer and food-industry requirements.

Choosing the right system is crucial to the success of an x-ray inspection program. X-ray equipment cannot solve contamination or production problems unless each element of the system, from beam angle to reject mechanism, has been chosen to fit the line and the product. In addition to helping manufacturers specify a system for optimal inspection, a good grasp of x-ray technology will help to ensure smooth installation, avoid major modifications after integration, maximize operational efficiency and ease verification testing.

The white paper focuses on the following areas in detail:

  • What are the differences between vertical beam, horizontal beam and combination beam x-ray systems?
  • What transport system designs are available?
  • What reject systems are available and which factors determine the correct choice?
  • What reject receptacles are available?
  • How to prevent typical reject problems?
  • How can integrated failsafe design features mitigate the risks associated with system malfunction?

Download this informative white paper to learn more.

The weakest link in most x-ray systems is ineffective reject systems, which result in contaminated product not being effectively and reliably removed from the production line. A correctly-specified x-ray system should be foolproof and capable of rejecting all suspect packs under all circumstances, regardless of the frequency of occurrence or the location of the foreign body within the product.

When specifying an x-ray inspection system, the following application problems should be considered:

  • Reject not suitable for the application
  • System not capable of removing consecutive contaminated packs
  • Failure of the reject due to low air pressure/volume, pipe blockage or solenoid failure
  • Downstream product backing up to and through the x-ray system
  • Conveyor speed changed without changing reject timings
  • Product spacing/pitching and reject not compatible

One of the benefits of a single source of responsibility for conveyor, reject and x-ray systems is that it allows such issues to be addressed at the design stage.

White Papers

Effects of X-ray Inspection on Pharmaceutical Products
This white paper examines the potential effects of x-ray inspection on pharmaceutical products and discusses why and how manufacturers use x-rays to i...
How Safe is X-ray Inspection of Food?
This white paper is for food manufacturers who consider x-ray inspection to comply with food-safety regulations and legislations.
Reduce The Risk of Non-compliance
A white paper describing seven ways service support from a product inspection equipment supplier can help manufacturers gain food safety certification...
FSMA Final Requirements
Understanding and meeting the final FSMA requirements in preparation of the Food Safety Modernization Act.
Thank you for visiting We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing