Low Temperature Thermomechanical Analysis - METTLER TOLEDO

TMA/SDTA 2+ LN/600

Swiss Quality

The TMA/SDTA 2+ LN/600 incorporates Swiss precision mechanics and is available in four versions with furnace systems optimized for measurements between –150 and 600 °C.

The TMA/SDTA 2+ is the only instrument on the market that measures the sample temperature very close to the sample in all operating modes.

  • SDTA – for the simultaneous measurement of thermal effects
  • One Click™ – provides efficient sample measurement
  • Nanometer resolution – allows very small dimensional changes to be measured
  • Wide temperature range – from –150 to 600 °C
Ring för offert

Specifikationer - TMA/SDTA 2+ LN/600
Temperaturområde –150 to 600 °C
Max. sample length 20 mm
Length resolution 0.5 nm
Force range −0.1 to 1 N
SDTA resolution 0.005 °C
DLTMA frequencies 0.01 to 1 Hz

Innovative Technology

 

Features and Benefits of the TMA/SDTA 2+ LN/600

 

Wide temperature range – from –150 to 600 °C

SDTA – for the simultaneous measurements of thermal effects

One Click™ – provides efficient sample measurement
Nanometer resolution – allows very small dimensional changes to be measured  
Dynamic load TMA (DLTMA mode) – measures weak transitions and elasticity

Wide measurement range – for small and large samples

Modular design – allows future expansion to meet new requirements

 

Dokumentation

Produktbroschyrer

Brochure: TMA/SDTA 2+
The TMA/SDTA 2+ incorporates Swiss precision mechanics and is available in four versions with furnace systems optimized for measurements between –150...
Brochure: STARe Excellence Software
Thermal analysis is a well-established analytical method that is widely used in many different fields. It provides laboratories with valuable results...
The Future of Thermal Analysis Brochure
Thermal Analysis comprises a group of techniques that measure the physical or chemical properties of a sample as a function of temperature or time whi...

Datablad

Datasheet: STARe Software Option Mathematics
This software option offers a number of useful calculations that can be applied to curves for advanced evaluation possibilities, adding even more flex...
Datasheet: Conditional Experiment Termination
This software option reduces unnecessary measurement time and improves safety when measuring unknown samples. It enables the instrument to terminate a...
Datasheet: nth Order Kinetics
Kinetic models are suitable for the analysis and simulation of chemical reactions. The software option calculates kinetic parameters based on one or m...
Datasheet: Model Free Kinetics
Model Free Kinetics (MFK) allows you to predict reaction behavior under different conditions, where measurements are difficult to perform or where the...
Advanced Model Free Kinetics Datasheet
STARe software’s Advanced Model Free Kinetics (Advanced MFK) program helps in the investigation and optimization of a process. It allows the predictio...

Manuals

Tillbehör

Support

Enastående service

METTLER TOLEDO erbjuder värdefull support för att hålla dig informerad om ny utveckling. Dessutom kan du utöka dina kunskaper genom att

 

läsa en UserCom.

Vår populära, tekniska kundtidning, där användare och specialister publicerar applikationer från olika områden.

 

delta i webbseminarier.

Diskutera specifika ämnen med experter.

 

 

ta en titt i våra specialiserade handböcker.

Skrivna för användare av värmeanalys, med bakgrundsinformation, teori och praktik, användbara tabeller med materialegenskaper och många intressanta applikationer.

 

förbättra dina färdigheter inom värmeanalys.

Webbaserad utbildning är ett effektivt sätt för att lära sig snabbt och bekvämt.

 

söka i vår databas.

Om du har en specifik applikationsfråga kan du hitta svaret i applikationsdatabsen.

 

 

lära dig i klassrummet.

Klassrumsutbildning är fortfarande ett av de effektivaste sätten att lära sig på.

 

hålla dig underrättad – även när du är ute på språng.

Få tillgång till all möjlig information och alla sorters tjänster som relaterar till värmeanalys via din mobila enhet.

se en video.

Våra nya tekniska videor förklarar komplicerade frågor som rör värmeanalysinstrument och programvaran STARe.

 

 

Få din offert
TMA/SDTA 2+ LN/600