Dissolved Ozone Measurement in Pharmaceutical Water - METTLER TOLEDO

Dissolved Ozone Measurement in Pharmaceutical Water

Background

Ozone (O3) is an unstable tri-atomic form of oxygen. It is a very strongly oxidizing gas that is injected into water to remove organics that may contribute color, odor or taste. Most importantly, ozone sanitizes the water, rapidly destroying any microbiological contamination. Dissolved ozone reverts back to harmless oxygen in a matter of minutes, depending on the temperature and pH of the water, so it must be generated and measured right next to the process. Ozone leaves virtually no harmful breakdown products.

Ozone generators operate by passing dry air or oxygen next to high voltage electrodes where a corona discharge converts some of the oxygen to ozone, similar to the reaction caused by a lightning storm. The gas mixture is then contacted with the water, either in a tank diffusion system or in a pipe with venturi injector. Intimate contact is made to maximize the dissolution. There are newer generation techniques that can produce ozone directly in the water and reduce the possibility of atmospheric losses.

Ozonation in Pharmaceutical Water Production

 

Disinfection

Ozone is an excellent material for disinfecting pharmaceutical water systems. However, it is an undesirable addition to point of use pharmaceutical water. In order to eliminate the ozone, a UV light source is employed to effectively destroy it after the disinfection process is complete. The UV light also has the added benefit of providing further disinfection.

Clean-in Place (CIP)

Increasingly, ozone is being used in pharmaceutical processes to sanitize pipe works and to reduce biofilm quicker and at lower cost than heat or chemicals. Also, ozone breaks down into harmless oxygen.

Dissolved Ozone Measurement

 

Due to the critical requirements for pharmaceutical water, on-line monitoring and control of ozonation have become standard practice.

In most pharmaceutical water applications, ozone monitoring is required at three critical measurement points in the production process as seen in figure 1.

Ozone disinfection system
Ozone disinfection system
 
 
 
 
 
 
 
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.