Sonda ParticleTrack C35 z technologią FBRM® jest przeznaczona do badania, rozwoju, skalowania i kontroli procesów granulacji i proszkowania, w tym prasowania walcowego, mielenia na mokro, granulacji w złożu fluidalnym i warstwowania w złożu fluidalnym.
Wśród podstawowych zalet sondy ParticleTrack C35 wymienić można następujące:
Technologia FBRM® pozwala naukowcom i inżynierom śledzić szybkość i stopień zmian liczności i wymiarów cząstek oraz granulowanych proszków w warunkach procesowych.
Sonda ParticleTrack C35 otrzymała nagrodę Powtech/TechnoPharm Innovation Award 2010!
ParticleTrack G400 with FBRM Technology is a probe-based instrument that is inserted directly into laboratory reactors to track changing particle size and count in real time at full process concentrations. Particles, particle structures and droplets are monitored continuously, as experimental conditions vary, providing scientists with the evidence required to deliver consistent particles with the required attributes.
Particle size and count directly impact performance in multiphase processes including crystallization, emulsification and flocculation. By monitoring particle size and count in real time scientists can understand, optimize and scale-up processes confidently using evidence-based methods.
Particles can change when sampled and prepared for offline analysis. By tracking changes to size and count, as particles naturally exist in process, scientists obtain process understanding safely and with no time delay – even at extremes of temperature and pressure.
By monitoring particles continuously, as experimental conditions are varied, it is possible to determine the influence of process parameters on particle size and count. This unique information can be used to design processes that will consistently deliver particles with optimized attributes.
Sondę Particle Track G600L z technologią FBRM® można wykorzystać do badania próbek. Sondę można montować w małych naczyniach laboratoryjnych (500ml - 10L) lub instalować w rurociągach w celu monitorowania w czasie rzeczywistym procesów ciągłych. Pneumatyczna konstrukcja sondy ParticleTrack G600L sprawia, że można ją z powodzeniem stosować pod wyciągiem laboratoryjnym.
Technologia FBRM® (Focused Beam Reflectance Measurement – Pomiar Reflektacji Skupionej Wiązki) pozwala śledzić szybkość i stopień zmian, jakim ulegają cząstki, struktury cząstek i krople występujące w procesie - przy pełnym stężeniu procesowym. Pomiary FBRM® prowadzone w trybie on-line pomagają chemikom i inżynierom powiązać zmienne procesowe ze zmianą wymiarów, kształtu i liczności cząstek, umożliwiając szybką optymalizację i skalowanie procesów krystalizacji oraz procesów zawierających cząstki i krople.
Użytkownicy korzystający z technologii FBRM® mogą:
ParticleTrack G600 with FBRM technology is a rugged probe-based instrument that is inserted directly into large-scale vessels or pipelines to track changing particle size and count in real time at full process concentrations. Particles, particle structures and droplets are monitored continuously, as process parameters vary, allowing engineers to monitor, troubleshoot and improve processes effectively.
Particle size and count directly impact performance in multiphase processes including:
By monitoring particle size and count in real time, at full production scales, engineers can monitor process consistency and identify strategies to make significant process improvements.
Particles can change when sampled and prepared for offline analysis. By tracking changes to size and count, as particles naturally exist in process, engineers obtain process understanding at full production scales, safely and with no time delay – even at extremes of temperature and pressure.
By monitoring particles continuously, as operating conditions vary, it is possible to determine the root cause of poorly performing processes. Operators can identify process upsets quickly and engineers can utilize evidence obtained at full production scale to redesign challenging processes and make improvements.
A flexible mounting system allows probes to be installed in reactors or pipelines using standard flanges, dip pipes and ball valves across a wide range of temperatures and pressures. Optional purged enclosures rated to ATEX and Class I, Div 1 standards ensure instruments can be installed safely in hazardous locations.
Instrumenty FBRM® z sondą procesową ParticleTrack G600 Ex można stosować w strefach niebezpiecznych do monitorowania przebiegu procesów w czasie rzeczywistym. Sondy procesowe ParticleTrack G600 Ex można instalować w:
Technologia FBRM® (Focused Beam Reflectance Measurement – Pomiar Reflektancji Skupionej Wiązki) daje możliwość badania cząstek i kropli w trybie on-line w stężonych zawiesinach i emulsjach bez konieczności pobierania próbek i ich przygotowywania. Technologia FBRM® pozwala śledzić szybkość i stopień zmian jakim ulegają cząstki i ich struktura w rzeczywistych warunkach procesowych. Dzięki temu naukowcy i inżynierowie mogą szybko powiązać dynamikę systemu cząstek z warunkami procesowymi, osiągając w ten sposób optymalną jakość produktów i wydajność procesów – takich jak filtracja oraz kolejnych procesów po filtracji.
Użytkownicy korzystający z technologii FBRM® mogą:
Wszystkie sondy procesowe ParticleTrack G600 Ex można montować ze zdejmowanym gwintowanym kołnierzem dopasowującym lub złączem triclamp, które pozwalają instalować sondę w rurociągu lub zbiorniku bez konieczności wspawywania sondy na stałe. Możliwa jest instalacja z zaworem kulowym, ANSI, DN i inne. Dostępne są zestawy do głębokiej instalacji sondy ze szczegółową instrukcją montażu/demontażu.
Keeping FBRM® C35 running at peak performance is the best way to optimize the Total Cost of Ownership (TCO) as it ensures maximum Uptime and Performance as well as maintaining Compliance with quality and industry standards.
METTLER TOLEDO Field Service Engineers possess the experience and Expertise for successful asset lifecycle management.
From onsite instrument Calibration and Preventive Maintenance (PM) to Full Service Coverage, the options available can be tailored to meet need and budget requirements ensuring complete cost control.
The most cost effective option for new instrument owners as it can be purchased at point of sale. It protects the system beyond the initial factory warranty and provides additional value-added services, priority support and discounts.
To keep the laboratory or production process running at maximum speed, instrument Uptime, Performance and Compliance are key. It is important to identify issues before they become problems and Full Service Coverage helps ensure instruments are available when needed by providing priority onsite and factory service with no cost surprises.
Calibration and Preventive Maintenance
The best option if budgetary constraints and Total Cost of Ownership are not a primary concern and instrument downtime does not affect productivity. Repair costs are on an ad-hoc basis but Calibration and Preventive Maintenance ensures equipment Performance and Compliance are within specification.
METTLER TOLEDO Service Specialists
The METTLER TOLEDO Service Team understands what it takes to get the best from each instrument. Benefit from the Service Team’s experience and industry knowledge to ensure optimal equipment Uptime, Performance, Compliance and the Expertise necessary to maximize instrument investment.
Take advantage of the experience, skills and thorough know-how of the dedicated Field Service Engineers strategically located around the world and locally - which ensures a timely response.