10 µL Pipette Tips | ShaftGard | Rainin

ShaftGard 10 µL Pipette Tips

Prevent Cross-Contamination

A ShaftGard™ 10 µL universal-fit pipette tip shields the end of the pipette, protecting it from cross-contamination from tubes and other vessel edges. This reduces the need to decontaminate or sterilize the shaft and tip ejector when working with biological, radioactive or other critical samples. ShaftGard tips are longer than standard 10 microliter pipette tips for easier access into microcentrifuge and PCR tubes. Available as filtered and non-filtered, sterilized and non-sterilized.

Call for Quote
View Results ()
Filter ()

Add 1 or 2 more products to compare

Advantages of ShaftGard 10 µL Pipette Tips

10 uL pipette tips

Shaft and Tip Ejector Protection

ShaftGard™ 10 uL pipette tips enclose the pipette's tip ejector and shaft, protecting it from accidental contamination and reducing the need to sterilize the tip ejector when working with critical samples. ShaftGard tips are longer than standard micro-10 tips for easier access into microcentrifuge and PCR tubes. Use with 2 and 10 μL pipettes with universal, conical shafts.

Shaftgard pipette tips

Reduce Pipette Contamination

ShaftGard™ tips reduce contamination by enclosing the tip shaft and ejector. The tip is ejected by pressing on the “shoulder” inside the tip – affording further protection against contamination.

10 uL pipette tips

FinePoint

FinePoint™ tips taper to a fine orifice diameter. Their slender design, in combination with thin, flexible walls, creates an exceptionally supple tip that assists in sample touch-off. The narrow orifice aperture and thin wall surrounding the orifice provides minimal surface area for residual sample to adhere to during sample dispensing. FinePoint tips discharge completely for optimal pipetting accuracy.

Applications

Rainin LR Low Rentention Tips Brochure
Learn how Rainin LR low retention tips improve pipetting accuracy by minimizing residual volume, particularly when transferring liquids such as viscou...
Rainin Pipette and Tip Product Catalog
The Rainin pipette and tip catalog contains information on all tip products with a greater level of detail and explanations.
bioclean pipette tips datasheet
For successful experiments, pipette tips must be completely inert and not interfere with samples. Rainin BioClean tips are guaranteed to be free of RN...
Zero Contamination in Rainin Pipette Tips
A paper published in Science shows that by using certain polypropylene tips and tubes, experiments can be inhibited and results will be adversely affe...
sterile vs non sterile pipette tips
This white paper proves how there is essentially zero possibility for any Rainin pipette tip to contribute contaminants to customer samples.
Comparative Carbon Footprints Terrarack
METTLER TOLEDO Rainin is the pioneer of high purity ‘BioClean’ tips, creating a range of super-clean tips which are certified to be free of biological...
Counteracting Liquid Retention in Tips Benefits of Using Low Retention Tips
This white paper shows that Rainin LR tips are capable of “normalizing” the performance of liquids with diverse compositions and physical properties d...
How To Choose a Good Pipette Tip
Download an introduction and detailed advice on what to look for when choosing a good pipette tip, i.e., a tip that does not influence the experiment'...
Why Rainin Does Not Test for RNA
It may appear curious to some customers that Rainin tests its tips for human DNA contamination, but conducts no such tests for contaminating RNA.
+632 85288900
Call Service

Expert Service – Tailored to Fit Your Pipetting Needs

METTLER TOLEDO supports and services your pipettes through their entire life-cycle, from good pipetting techniques to preventive maintenance and calibration to equipment repair.

Uptime
Support & Repair
Performance
Maintenance & Optimization
Compliance
Calibration & Quality
Expertise
Training & Consulting