Cond Sensor InPro7108-VP-PEEK

4-Electrode Conductivity Sensor.The InPro 7108-VP-PEEK utilizes 4-electrode technology to expand its measurement range in medium to high conductivity solutions.

Wide Measuring Range

WideRange technology makes the sensor suitable for many applications; rinsing, control of dilution processes, and monitoring of salt content.

Withstands Sterilization Cycles

The InPro 7108 conductivity sensor can withstand the most rigorous CIP/SIP procedures in the food and pharmaceutical industries.

Withstands Aggressive Solutions

This conductivity sensor has been especially designed and ruggedly built to withstand even the most aggressive chemical solutions.

Material No.: 52002002

Call for Quote
Specifications - Cond Sensor InPro7108-VP-PEEK
Temperature Sensor
PT 1000
Cell Constant
0.25 cm-1
Cable Connection
Vario Pin (IP 68)
Cell Constant (nominal)
0.25 cm–1
Measurement Technology
Conductive
Process Connection
1 inch NPT
Sterilizable
Yes
Operating Temperature (Fahrenheit)
14...284 °F
Operating Temperature (Celsius)
-10...140 °C
Mechanical Pressure Resistance (PSI)
250 psi (77 °F), 100 psi (203 °F)
Model Family
4-electrode sensor
Hazardous Area Approvals
Yes
Measured Pressure Resistance
0 – 100 psig @ 203 °F
0 – 246 psig @ 77 °F (0 – 7 barg @ 95 °C
0 – 17 barg @ 25 °C)
Electrode Material
Sterilizable, 316 L or HA-C22
Primary Media/Application
Other Water Processes
Chemical Processes
Other Industrial Processes
Wastewater
Hygienic/Biocompatibility Approvals
No
Mechanical Pressure Resistance (Bar)
17 bar (25 °C), 7 bar (95 °C)
Sensor Material
PEEK (FDA)
System accuracy
± 5 % or better
Measurement Range
0.02-650 mS/cm

Compact Sensor Design

The conductivity sensor has a very compact design, which allows installation even in small pipes. At the same time, the sensor design also meets the highest hygienic requirements.

Process Reliability and Easy Connection

The IP68 rated VarioPin connector system ensures excellent signal transmission and avoids problems associated with humidity.

Low Maintenance Due to Flat Surface

The smooth flat surface design prevents any significant fouling. This increases the reliability of the sensor, and only low maintenance is required.

Accessories

Consumables

Software

Get Your Quote
Cond Sensor InPro7108-VP-PEEK
FDA
USP Class VI