Thermal Analysis System TGA/DSC 3+

TGA for Unmatched Performance.STARe System TGA/DSC 3+

Outstanding Weighing Performance

No other TGA can measure up to 50 million points continuously. Depending on the balance type, up to 5 gram can be measured with a resolution of 0.1 μg.

Lowest Minimum Weight on All Balances

A low minimum weight ensures that small samples close to the low end of the weighing range are also weighed accurately.

DSC Heat Flow Measurement

The TGA/DSC 3+ can be equipped with a SDTA, DTA or DSC sensor for simultaneous detection of thermal effects that do not show a weight loss.

Material No.: 30139250

Call for Quote
Specifications - Thermal Analysis System TGA/DSC 3+
Technique
Simultaneous Thermal Analyzer (TGA/DSC)
Differential Scanning Calorimetry (DSC)
Thermogravimetry (TGA)
Applications
Glass Transition
Heat Capacity (cp)
Crystallization
Compositional Analysis
Kinetics
Oxidation Induction Time (OIT)
Temperature Modulated DSC
Data Sampling
10 data pts / sec
Sensor Types
DTA
DSC
SDTA
Temperature Range
22 °C – 1,600 °C
Options
Sorption
Vacuum
FTIR
MS
Micro GC
GC/MS
Signal Time Constant
15 s
Sensor Output
Mass
Heat Flow
Cooling Rate (min)
0.02 K – 50 K
Heating Rate (/min)
0.02 K – 250 K (2 K – 250 K)
Temperature Range
30 °C - 1,600 °C

METTLER TOLEDO Ultra-Micro balance

rely on the leader in balance technology

Wide temperature range

analyze samples from ambient temperatures up to 1600 °C

DSC Heat Flow Measurement

for simultaneous detection of thermal effects

Built-in gas flow control

investigate your samples in defined atmospheres

Automated TGA-FTIR, TGA-MS and TGA-GC/MS

perform accurate evolved gas analyses using FTIR, MS or GC-MS

Factory endurance-tested sample robot

operate efficiently and reliably around-the-clock

Modular concept protects your investment

fits to your current and future needs

Documentation

Product Brochures

Brochure: TGA/DSC 3+
Thermogravimetry (TGA) is a technique that measures the change in weight of a sample as it is heated, cooled or held at constant temperature. Its ma...
Brochure: STARe Excellence Software
Thermal analysis is a well-established analytical method that is widely used in many different fields. It provides laboratories with valuable results...
The Future of Thermal Analysis Brochure
Thermal Analysis comprises a group of techniques that measure the physical or chemical properties of a sample as a function of temperature or time whi...

Accessories

Consumables

Alumina Crucibles for Thermal Analysis

Aluminum oxide crucibles

Material No.: 51140843

Aluminum oxide crucibles

Material No.: 24123

Aluminum oxide crucibles

Material No.: 24124

Aluminum Crucibles for Thermal Analysis

Aluminum Crucibles

Material No.: 26763

Aluminum Crucibles

Material No.: 51119870

Aluminum Crucibles

Material No.: 51119810

Set of 100 crucibles and lids optimized for enthalpy measurements. The crucible can be hermetically sealed to suppress endothermic evaporation or vaporization when carrying out DSC measurements on volatile substances.

Material No.: 30085850

Aluminum Crucibles

Material No.: 27811

Aluminum Crucibles

Material No.: 51119872

Set of 400 lids specially made to be automatically pierced before the transfer into the measuring cell.

Material No.: 51119873

Copper Crucibles for Thermal Analysis

Set of 100 crucibles without lids. This type of crucible is almost exclusively used for the determination of oxidative stability (OIT). Usually the induction time measured in this way is compared to the value obtained using an inert aluminum pan.

Material No.: 51140407

Gold Crucibles for Thermal Analysis

Set of 6 gold crucibles with lids. The gold pan is chemically resistant. Other than some types of aluminum pans, it is the only pan that can be hermetically sealed by cold welding. The maximum permitted pressure is 0.25 MPa.

Material No.: 27220

Set of gold plated Aluminum crucibles with lids. The set includes 10 pans and lids. The gold plated aluminum crucible is chemically resistant and can be hermetically sealed by cold welding. The maximum permitted pressure is 0.2 MPa.

Material No.: 51142973

Platinum Crucibles for Thermal Analysis

Platinum Crucibles

Material No.: 51140842

Platinum Crucibles

Material No.: 51119654

Sapphire (PCA) Crucibles for Thermal Analysis

Set of 4 crucibles with lids made from a polycrystalline alumina oxide with properties similar to sapphire. PCA is very tight, chemically resistant, and inert. This crucible is recommended for all materials, including melting metals.

Material No.: 51140845

Software

Get Your Quote
Thermal Analysis System TGA/DSC 3+