Product Brochures
Crucibles serve as containers for samples during DSC and TGA measurements. They guarantee that the sensor is not contaminated during the measurement.
Reusable HP Ni Alloy crucible
After the measurement, the crucible can be opened, cleaned and reused with the same seal disk. The maximum pressure is 10 MPa.
Chemically resistant crucible material
The material consists of a temperature resistant alloy made of Ni, Cr, Ti and Al. The crucible can be sealed thanks to its thread.
Furnace expander required
When sealed, the 500 μL crucible has a height of about 16 mm and the furnace expander must be therefore used, Art. No 51140735.
Material No.: 650066
Material | Steel |
Volume | 500 µL |
Measuring Technique | DSC |
Automation | No |
Maximum Temperature | 750 °C |
Maximum Pressure | 10 MPa |
Number of Pieces | 1 |
Included | with Lids |
Pin | with |
Beaker Volume | 500 µL |
Lid | with |
Special sealing tool necessary
This is the tool for cylindrical crucibles made of Ni alloy. Fix the crucible in one of the holes and the cover in the other to seal them with the required torque.