Compacte transmitter M100
M100 compacte transmitter

Compacte transmitter M100

Eenvoudige installatie

Veelzijdige en vereenvoudigde bediening
Eenvoudige plug-and-measurewerking
Voorspellende diagnose voor minder onderhoud

Producten en specs

 
Producten en specs
Filter:
Filter
Wis alle
 
Parameter
Classificatie van explosiegevaarlijke omgevingen
Sensortype
Communicatie
Meer informatie
ParameterISM 1-wire pH, amperometric oxygen and conductivity sensors
Classificatie van explosiegevaarlijke omgevingenATEX / IECEx Zone 1,
CSA Class I; II, III Div 1, Class 1, Zone 0,
NEPSI Ex Zone 1
SensortypeISM
CommunicatieHART®
ISM featuresPlug and Measure, DLI, ACT, TTM
EnclosureIP 66, NEMA 4X
Supply voltage14 – 30 VDC
Analog output1 × 4 to 20 mA (loop powered), galvanically isolated
Meer informatie
ParameterISM 1-wire pH, amperometric oxygen and conductivity sensors
Classificatie van explosiegevaarlijke omgevingenNot available
SensortypeISM
CommunicatieHART®
ISM featuresPlug and Measure, DLI, ACT, TTM
EnclosureIP 20
Supply voltage14 – 30 VDC
Analog output1 × 4 to 20 mA (loop powered), galvanically isolated
Meer informatie
ParameterISM pH, amperometric oxygen, and carbon dioxide sensors
Classificatie van explosiegevaarlijke omgevingenNot available
SensortypeISM
CommunicatieMODBUS RTU
ISM featuresPlug and Measure, DLI, ACT, TTM
EnclosureIP 67
MontageOn head of 1-wire sensor: AK9
Supply voltage24 VDC
Analog outputActive 2 × 4 to 20 mA, galvanically isolated to passive DCS card
SensorcompatibiliteitISM 1-wire pH, DO (amperometric) and carbon dioxide sensors
M100 SM 1-draads30 365 366
Meer informatie
ParameterOptical oxygen sensors
Classificatie van explosiegevaarlijke omgevingenNot available
SensortypeISM
CommunicatieMODBUS RTU
ISM featuresPlug and Measure, DLI, ACT, TTM
EnclosureIP 67
MontageOn head of RS 485 sensor: VP8
Supply voltage24 VDC
Analog outputActive 2 × 4 to 20 mA, galvanically isolated to passive DCS card
SensorcompatibiliteitISM RS485 optical DO sensors
M100 SM 1-draads30 365 367
Vergelijking

Documentatie

Apparaatstuurprogramma's

M100 2XH DTM Setup V1.00.0003
HART, DTM for PACTware ™: Version 4.x

Toepassingsoplossingen

Application Solutions for M100 Modbus Programmers Guide
This programmers guides explains general modbus informations, implemented modbus registers in M100, detailed description of the implemented Modbus re...

Technische specificaties

Technical Data: M100 DR DIN Rail Transmitter for pH/ORP, pH/pNa, Oxygen and Conductivity
The M100 DR DIN rail transmitter is a 2-wire transmitter with HART® communication capability for analytical measurements. The M100 DR is a single-chan...

Gegevensbladen

Datasheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...

Gebruikersinformatie

Operating Instructions for Head Mount Transmitter M100
These operating instructions offer important notes on handling of the M100 transmitter of METTLER TOLEDO. A prerequisite for safe work is compliance w...
Operating Instructions: DIN Rail Transmitter M100 DR
These operating instructions offer important notes on handling of the M100 DR transmitter of METTLER TOLEDO. A prerequisite for safe work is complianc...
Instruction Manuals for Sensor Mount Transmitter M100 SM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
Beknopte handleiding Transmitter M100 Kopbevestiging
De M100 is een 2-draadstransmitter met kopbevestiging voor analytische metingen met HARTcommunicatiemogelijkheden. De M100 is een 1-kanaals multiparam...
Beknopte handleiding Transmitter M100/2H DR
De M100 DIN-railtransmitter is een 2-draadstransmitter voor analytische metingen met HARTcommunicatiemogelijkheden. De M100 is een 1-kanaals multipara...

Webinars

Webinar: Small Footprint Installation for Hazardous Areas
The continuous, real-time information that in situ analyzers provide has huge advantages over lab analyses of grab samples, and in the end leads to mu...

Video’s

The world's first head mount analyzer transmitter
Watch the video to see how easy in-situ analysis becomes with the M100 head mount transmitter.

Service

+31 342 426 080
Bel Service
 
 
 
 
 
 
 
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.