Plug & Play titration electrodes - METTLER TOLEDO

Plug & Play titration electrodes

Integrated Sensor Chip for full Plug & Play
The Sensor Chip in the electrode head stores sensor data and sends it to the titrator setup when plugged in. This assures that the correct sensor and sensor data are used without requiring any user interaction.

Error-free working

The new Plug & Play titration electrodes contain the Sensor Chip in the electrode head that stores all relevant data of the pH and metal titration electrodes. As soon as the Plug & Play sensor is connected to the Excellence titrator, it is automatically recognized and ready for use. Electrode type, serial number, calibration data and validity period as well as working life stored in he Sensor Chip are automatically read-in by the titrator. Errors are minimized, mix-ups are a thing of the past and complete traceability according to 21 CFR part 11 is ensured if LabX titration 2.6 is used.

 

Sensor chip

Appearance

The new Plug & Play sensors feature a S12 head containing the Sensor Chip. The new electrode head is longer than the classical S7 head. The sensors are labeled as DGi (pH glass) or DMi (platinum or silver ring) in prominent blue letters.

 

Connection cable

Connection cables

In order to use the complete functionality of a Plug & Play sensor a modified connection cable is required. The new cables are labeled with a blue ring in order to indicate the enhanced functionality with respect to the support of the Plug & Play sensors and are fully backward compatible to classic sensors.