Analyzer 2301Na Full Door
Simple, Dependable Operation.The 2301Na Sodium Analyzer delivers solid value with simple, early detection of trace sodium contamination. It is an ideal solution for staying under budget with in-line sodium monitoring in ultrapure water or steam cycle chemistry.
Measurement Dependability
A combination pH and reference electrode system confirms the pH of the incoming sample for accurate reagent addition and data measurements.
Full Enclosure for Additional Protection
The full enclosure design provides additional ingress protection, allowing the analyzer to operate in more challenging environments.
Maximum Uptime
Minimal maintenance requirements and reagent consumption plus the absence of KCl reduces operating costs and maximizes analyzer uptime.
Material No.: 58042004
Features
Simple, Safe Operation
Simple flexibility with manual calibration and grab sampling capability, plus the option to use DIPA or ammonium hydroxide reagent.
Worldwide Local Support
With local offices staffed by trained sales and service personnel across the world, skilled technical help is always available. Rely on our experienced team of service technicians for dependable, efficient support.
Full Lifecycle Value
The 2301Na analyzer delivers measurement accuracy and reliability to exceed your expectations, not your budget. With long, 6-month maintenance intervals you can ensure analyzer uptime with less frequent etching, calibration and lower reagent consumption.
Complete Protection, Safe Operation
Long-lasting consumables, reagent flexibility, minimal maintenance requirements and a fully enclosed design provide maximum operator safety at all times.
Specifications
Specifications - Analyzer 2301Na Full Door
| Sodium Measurement Range | 0.01-100,000 ppb or equivalent ppm, auto-ranging |
| Sodium Measurement Accuracy | ± 10% of reading ± 0.1 ppb, typical using DIPA as reagent ± 10% of reading ± 1 ppb, typical using ammonium hydroxide as reagent |
| Response Time | 90% at 5 minutes |
| Sample pH | 2.5-12 |
| Update Rate | Once per second |
| Reagent Consumption | 3-4 L per year DIPA, or 9-12 L per year ammonium hydroxide typical more at higher temperatures and for cation exchange samples |
| Sample Flow rate | >40 mL/min (>20 mL/min for cation exchange samples), excess to drain |
| Sample Temperature | 5-50°C (41-122°F) |
| Sample Pressure | 0.3-7 bar (5-100 psig) |
| Grab Sample Measurement | Available option |
| Power Supply | 100-240 VAC, 50-60 Hz, 25 W, on power loss all settings are retained without batteries |
| Dimensions (HxWxD) | 851 x 400 x 165 mm (33.5" x 15.75" x 6.5") |
| Weight | 4.5 kg (10 lbs) |
| Ambient Operating Temperature | 5-50 °C (41-122 °F) |
| Humidity | 10-90% non-condensing |
| Ratings/Approvals | CE, UL, IP65 |
| Dimensions (HxWxD) | 851 mm x 400 mm x 165 mm |
| Process Connection | Drain Hose: 19x25.4 mm (3/4 x 1") 2 m (6 ft) length included Sample inlet: 6 mm or 1/4" OD tube SS compression fitting Drain hose: 19 x 25.4 mm (¾ x 1"), 2 m (6 ft) length included |
| Operator Interface | 4-line backlit LCD, 5 tactile keys simultaneous display of sodium, conditioned pH, auto-cal status (temperature optional) |
| Analog Output | 22mA alarm, 500 ohm max load, not for use with externally powered circuit For sodium, conditioned pH, temperature four powered 0/4-20 mA, |
| Power Supply (AC/DC) | 100 V – 240 V |
| Analog Output Scaling | Linear, bi-linear, logarithmic (1,2,3,4 decades), auto ranging |
| Flow Rate | 40 mL/min – 60 mL/min |
| Measurement Parameter | Sodium |
| Electrode Conditioning | Manual |
| Operating Range (Temp.) | 5 °C – 50 °C |
| Relay Contacts | 3A resistive freely assignable to setpoints for sodium, pH, temperature other relays used for auto-cal |
| Sodium Calibration | Manual 3-point known addition manual 1- or 2-point |
| Operating Range | 0.01 ppb – 100,000 ppb |
| Analog Output Accuracy | ± 0.05 mA |
| EnclosureType | Full |
| Outputs | 4 Analog |
| Built-in sequencer | No |
