The filter probe adaption for the GPro 500 is a non-purged probe with a filter covering to prevent measurement interference in high dust or high condensate containing gas streams. It provides accurate and stable measurements in harsh, environments.
Measure in Dusty or wet Gas Streams
The GPro 500 with a filter probe offers stable measurement in applications where particulates typically would affect with a TDL measurement.
No Sampling or Conditioning System
The filter probe works in dusty or wet conditions, without a maintenance-prone sampling and conditioning system. This removes costs and downtime.
No Alignment Necessary
The non-purged filter probe adaption eliminates the alignment challenges of typical TDL analyzers during installation, ensuring fast, easy setup.
Effective path length | 200, 400, 800 mm (7.87", 15.75", 31.5") |
Gas Measured | Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia |
Lower Detection Limit | Based on analyzer chosen |
Short description | This process adaption connects to a GPro 500 gas analyzer for installation in high particulate content gas streams. |
Process Adaption or Sensor | Process Adaption |
Stable Measurement in Harsh Conditions The filter probe type adaption for the GPro 500 tunable diode laser gas analyzer enables in situ gas measurement in dusty, high-temperature or high speed gas streams. It can be connected to the full range of METTLER TOLEDO TDL gas parameters for measurement. | |
Reduced Lifecycle Maintenance Costs A major cost of a gas analyzer is its maintenance-prone sampling and conditioning system. The filter probe does not require these systems and includes an integrated blow-out system to clean the filter without direct intervention or system downtime. | |
Simplified Installation & Reduced Costs Typical TDL gas analyzers require significant planning and effort for alignment during installation in harsh gas streams. This need is removed by the non-purged filter probe process adaption. Eliminating the purging system also saves on utility costs. | |
For Combustion Control Applications The non-purged filter probe adaption for the GPro 500 offers a unique solution for high dust or high temperature gas streams. Typical applications include flame-out detection using a CO gas analyzer, and combustion control in boilers and incinerators. |