Cond Sensor 1.5Tri 0.1C SS 55mmISM
2-Electrode Conductivity Sensor.The UniCond 2-electrode conductivity sensor provides an exceptionally wide measurement range due to its advanced built-in circuit. The sensor can be used to measure everything from ultrapure water to brackish water (up to 50,000 μS / cm).
One Sensor for an Extensive Measurement Range
The digital UniCond sensor reduces equipment inventory by enabling the measurement of an extensive water purity range with a single sensor model.
Superior Measurement Accuracy
The advanced measuring techniques of the UniCond conductivity sensor contribute to superior accuracy over an extended range.
High Accuracy in Pure Water
UniCond exceeds performance of conventional sensors due to built-in measuring circuits and analog-to-digital signal conversion in the sensor head.
Material No.: 58031412
Features
Highly Stable Digital Signal
ISM technology converts the conductivity measurement into a highly stable, robust digital signal which is sent to the transmitter, enabling the sensor to quickly respond to minor changes in conductivity.
Fast and Easy Installation
ISM's plug-and-measure feature makes sensor installation fast and easy, since all relevant status and configuration information is stored in the sensor and automatically transferred from the sensor to the transmitter during startup.
Easy Traceability
Identification, calibration and maintenance data is stored in the UniCond sensor, which allows for clear traceability. The sensor meets strict NIST-traceable calibration requirements.
Fitting Meets Hygienic Requirements
The conductivity sensor's tri-clamp fitting makes it suitable for applications with hygienic requirements.
Specifications
Specifications - Cond Sensor 1.5Tri 0.1C SS 55mmISM
| Operating Range (µS/cm) | 0.02 – 3,000 |
| Temperature Sensor | PT 1000 |
| Cell Constant | 0.1 cm-1 |
| Connection | 1½ inch Tri-Clamp |
| Cable | N/A |
| Connector | n/a |
| Material certification | EN10204 3.1 & USP <88> Class VI |
| Measurement Technology | Conductive |
| Fitting material | 316L SS |
| Insertion length | 55mm |
| Model Family | UniCond |
| Hazardous Area Approvals | No |
| Measured Pressure Resistance | 203 psig @ 266 °F and 450 psi @ 77°F (14 bar @ 130 °C and 31 bar @ 25°C) |
| Electrode Material | SS 316L |
| Measured Pressure Resistance | 0 bar – 31 bar |
| Primary Media/Application | Pharmaceutical Waters Pharmaceutical/Life Science Production |
| Hygienic/Biocompatibility Approvals | Yes |
| Sensor Material | 316L SS |
| Process fitting | 1½" Tri-Clamp |
| Cell Constant (accuracy) | ± 1% for 0.02-5,000 µS/cm ± 3% for > 5,000 µS/cm |
| Electrode Configuration | 2-electrode |
| Measurement Range | 0.01 - 3,000 µS/cm |
Documentation
Brochures
The new edition of our Power Industry brochure addresses all areas of power plants where precise water analytics are needed. Get an overview of METTLE...
Datasheets
Digital liquid analysis sensors optimized for pure water treatment.
