METTLER TOLEDO weigh modules enable the quick and safe conversion of a tank, vessel, silo, hopper scales, conveyor or structural systems into a sca...
METTLER TOLEDO weigh modules enable the quick and safe conversion of a tank, vessel, silo, hopper scales, conveyor or structural systems into a scale. Built-in side-load and anti-lift protection ensure that safety, performance and precision are maintained. METTLER TOLEDO weigh modules are used in food, pharmaceutical and chemical applications.
They are available in various versions depending on the application and environment to meet requirements of OEM machine manufacturers, system integrators and end-users. Weigh modules incorporate SafeLock for fast and safe installation. The weigh module is locked and acts as a solid block protecting the load cell from overload during installation. No need to buy expensive dummy weigh module. A wide range of accessories are available for weigh modules including stabilizers for use with aggressive mixers and agitators, thermal pads to isolate from conducted heat and shock-vibration pads to dampen shock and vibration. Dead stands for level-control applications are also available.
METTLER TOLEDO offers a wide range of weigh modules from 5kg up to 300t capacity. Weigh modules are available in painted steel, zinc plated steel, 304 (1.4301) stainless steel and 316 (1.4401) stainless steel electro-polished. They are available in various legal-for-trade accuracy levels according to OIML R60 and NTEP HB44 starting from OIML 3000e (OIML C3), NTEP 5000d, OIML 6000e (OIML C6), NTEP 10000d to finally OIML 10000e (OIML C10). Weigh modules are available for hazardous area application and are approved according to ATEX, FM (Factory Mutual), cFM (Canada), IECEx and NEPSI. They meet protection classes IP67, IP68 or even IP69K. Weigh modules are available in EN1090 versions made in specially controlled and documented manufacturing process for high safety requirements. Weigh modules support the weightless calibration CalFree or even CalFree Plus allowing for tank calibration on a fingertip.
What is the difference between a weigh module and a load cell?
If we look at this question in simple terms, this can be easily explained. Put simply, a weigh module takes a non-traditional structure and turns it into a scale. And a load cell is what is within every 'traditional scale' – let's break that down a little further.
A weigh module takes a non-traditional structure, most commonly a tank, and turns it into a weighing device. This means, when we add weigh modules underneath tank legs, the tank goes from just a structure that was holding a substance, to a weighing structure that is measuring how much substance is within the tank itself.
A load cell, in simple terms, is the heart of every standard scale. Load cells are found in all scales, from a highly sensitive lab balance, to a heavy duty floor scale, and everything in between. Load cells are what takes a scale from just a platform, and turns it into a sensitive weighing device.
Why should I choose METTLER TOLEDO as my weigh modules and load cell provider?
METTLER TOLEDO takes a consultative approach to all projects. Our team of expert sales and service technicians work hard to ensure you get the solution that is fit for your purpose, with the required accuracy and durability for your application.