Transmitter M100 SM 1-Wire
 
Menu

Transmitter M100 SM 1-Wire

For Analog or Digital Biocontrollers

The M100 Sensor Mount (SM) is a single-channel transmitter for connecting 1-wire ISM pH, DO (amperometric) and CO2 sensors to a biocontroller. The Bluetooth 4.0 interface is compatible with the PC-based and mobile versions of iSense software.

Straight-forward Connectivity

The M100 SM offers multiple independent interfaces: two configurable 4/20 mA analog outputs and one digital MODBUS RTU.

Clear Sensor Status Alerts

LEDs clearly indicate sensor status, alarms and warnings to ensure your sensor is working properly.

Easy Sensor Handling

ISM’s Plug and Measure feature minimizes the risk of installation trouble and simplifies sensor handling.

M100 Sensor Mount Transmitter 1-Wire
Spécifications - Transmitter M100 SM 1-Wire
Model Family M100 SM
Paramètres de mesure pH; ORP; amperometric DO; CO2
Channels 1
Type de sonde ISM
Taille Sensor Mount
Power Supply 24 VDC
Sorties de courant 2 x 0/4-20mA
Relais None
Entrée numérique None
Analog input None
Régulateur PID None
Interface utilisateur None
Interface USB No
Étanchéité IP67
Communication Bluetooth
Wiring Mode 4-Wire
Homologation pour zones dangereuses No
Hygienic/Biocompatibility Approvals No
Other certificates CE compliant
Primary Media/Application Pharmaceutical/Life Science Production; Other Industrial Processes
Référence 30365366

Simplified installation
The M100 SM is an easy to install, sensor mount transmitter for the analog or digital integration of ISM optical dissolved oxygen sensors into a biocontroller‘s programmable logic controller.

Predictive maintenance
iSense Mobile and Bluetooth communication provide access at any time to ISM‘s predictive maintenance diagnostics. Diagnostics and other sensor data can be sent as an email from a mobile device.

Error-free operation
Transmitter current outputs are configurable via PC or mobile device. Reconfiguring is not necessary after a sensor exchange, eliminating configuration errors.

Electronic data management
Configuration and calibration data are stored on the sensor. Wireless communication allows this information to be sent to iSense where it can be used for sensor management and compliance purposes.

Documentation

Datasheets & Brochures

Datasheets for Sensor Mount Transmitter M100 SM
The M100 Sensor Mount (SM) is a single-channel transmitter. It allows the connection on biocontrollers of 1-wire ISM sensors for measuring pH, ampDO a...

Instruction Manuals

Instruction Manuals for Sensor Mount Transmitter M100 SM
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits ar...
Application Solutions for M100 Modbus Programmers Guide
This programmers guides explains general modbus informations, implemented modbus registers in M100, detailed description of the implemented Modbus re...

Bus Communication Info

M100 2XH DTM Setup V1.00.0003
HART, DTM for PACTware ™: Version 4.x

Webinars

Web-séminaire : Faible encombrement pour une installation en zones dangereuses
Les informations en temps réel et en continu fournies par les analyseurs in situ présentent de nombreux avantages par rapport aux analyses d'échantill...

Videos

Le premier transmetteur au monde avec montage sur tête
Regardez la vidéo pour découvrir à quel point l'analyse in situ devient facile grâce au transmetteur M100 avec montage sur tête.

Accessoires

Demandez un Devis
Transmitter M100 SM 1-Wire
Hazardous Area
FM Approved
FDA
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.