Good Measuring Practice in Refractometry
Curso on-line archivado

Good Measuring Practice in Refractometry

Curso on-line archivado

How to avoid errors and improve accuracy

refractometry
refractometry

Refractometry is the method of measuring the refractive index of a substance.

On digital refractometers the refractive index is measured with the aid of a light-emitting diode, a sapphire prism and a high-resolution optical sensor. The sample is put on the prism and the measurement is started. From a certain angle of incidence – the so-called critical angle – the light no longer penetrates the sample but is fully reflected from its surface and is detected by the optical sensor. This total reflection is converted into refractive index, BRIX, HFCS or user defined concentrations. A built-in Peltier thermostat controls the temperature (no water bath required).

Although digital refractometers are easy to use, some care is necessary in order to obtain reliable and reproducible results.

This webinar explains the most frequent causes of errors and how to avoid them in order to perform correct and repeatable refractometry measurements

30 minutes
English , Русский

The following topics are covered:

  • Temperature control by Peltier
  • Sample quantity
  • Working technique
  • Obtainable repeatability
  • Adjustment quality
  • Specs and tolerance (for verification, adjustment)

For more tips and tricks for refractometry download the "Refractive Index Measurement guide – How to improve refractive index measurements with digital refactometers"

Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.