New Budget Load Cells - METTLER TOLEDO

New Budget Load Cells

New load cells from METTLER TOLEDO provide cost-effective weighing with superior accuracy and compliance to common industrial standards. The new SLB215 and SLB415 nickel-plated steel load cells with hermetic sealing offer the same performance and reliability as their more expensive stainless-steel counterparts.

New Budget Load Cells
New Budget Load Cells

Hermetically sealed

Both the SLB215 and theSLB415 load cells are made from nickel-plated steel and are hermetically sealed by laser welding. This type of sealing is normally available only on higher-end full stainless steel models. The high-quality sealing protects the sensitive load cell components from moisture and dust for the best stability and measuring performance.

New Budget Load Cells
New Budget Load Cells

Blind Hole and Threaded Hole Versions

The SLB415 load cell has a blind hole to hold a rocker pin. This enables optimal force introduction to ensure the best accuracy in installations with temperature changes and structural deformation. It is also commonly used for installations with more than one load cell. METTLER TOLEDO offers a range of accessories with a rocker pin as force introduction.

The SLB215 has a threaded hole for load introduction to fix both ends of the load cell to the machine or instrument. The advantage is that the entire construction is stiff and the force introduction can't come off, but it is limited in thermal expansions and structural deformations. It can also be used for budget installations in which only one load cell is installed as a hanging scale. METTLER TOLEDO offers a range of accessories with threaded level feet and other mounting devices.

 

New Budget Load Cells
New Budget Load Cells

SLB215 Beam Load Cell

  • Threaded load introduction hole
  • OIML, NTEP, ATEX, FM approvals
  • IP67 Protection
  • Nickel-plated steel

SLB415 Beam Load Cell

  • Blind hole load introduction
  • OIML, NTEP, ATEX, FM approvals
  • IP67 Protection
  • Nickel-plated stee

Accessories for Load Cells

  • Foot Kits
  • Expansion Kits
  • Vibration Kits
  • Base Plate
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.