Non-Purged Probe Adaption for GPro 500
TDL Gas Analyzer with No Purging Needed
The non-purged probe process adaption offers all of the benefits of a probe-type tunable diode laser gas analyzer, without the need for process side purging. It is suitable for static, dry, and clean gases.
Measure in Low Speed and Static Streams
The GPro 500 with non-purged probe offers long-term measurement stability in applications where gas flows are extremely slow, such as tank inerting.
No Sampling or Conditioning System
The non-purged probe adaption works without a maintenance-prone sampling or conditioning system. This removes costs and measurement downtime.
No Alignment Necessary
The non-purged probe adaption eliminates the alignment challenges of typical TDL analyzers during installation, ensuring fast, easy setup.
|Effective path length||200, 400, 800 mm (7.87", 15.75", 31.50")|
|Gas Measured||Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia|
|Lower Detection Limit||Based on analyzer chosen|
|Short description||This process adaption connects to a GPro 500 gas analyzer for installation in low/no flow, clean gas streams.|
|Stable, Low Maintenance Gas Measurement|
The non-purged probe adaption for the GPro 500 tunable diode laser gas analyzer enables in situ gas measurement in slow flowing or static gas streams. It can be connected to the full parameter range of METTLER TOLEDO TDL gas analyzers.
|Reduced Lifecycle Maintenance Costs|
A major cost of a gas analyzer is its maintenance-prone sampling and conditioning system. The maintenance work on these systems increases the total cost of ownership significantly. These systems are fully eliminated with a non-purged probe type analyzer.
|Simplified Installation & Reduced Costs|
Many TDL gas analyzers require significant planning and effort for alignment during installation in a low-flow gas stream. This need is removed by the non-purged probe process adaption. Eliminating the purging system also saves on utility costs.
|For Safety & Inerting Applications|
The non-purged probe adaption for the GPro 500 offers a unique solution when there is no dust or moisture in the process. Typical applications include gas measurement in the headspace when inerting or blanketing tanks and vessels.