Filter Probe Adaption for GPro 500

Filter Probe Adaption for GPro 500

Analyzer for High Particule Content Gas

The filter probe adaption for the GPro 500 is a non-purged probe with a filter covering to prevent measurement interference in high dust or high condensate containing gas streams. It provides accurate and stable measurements in harsh, environments.

Measure in Dusty or wet Gas Streams
The GPro 500 with a filter probe offers stable measurement in applications where particulates typically would affect with a TDL measurement.

No Sampling or Conditioning System
The filter probe works in dusty or wet conditions, without a maintenance-prone sampling and conditioning system. This removes costs and downtime.

No Alignment Necessary
The non-purged filter probe adaption eliminates the alignment challenges of typical TDL analyzers during installation, ensuring fast, easy setup.

 

Filter Probe Adaption for GPro 500
Specifications - Filter Probe Adaption for GPro 500
Effective path length 200, 400, 800 mm (7.87", 15.75", 31.5")
Gas Measured Integrates with GPro 500 analyzers for Oxygen, CO₂, CO, HCl, H₂S, Moisture, Methane, Ammonia
Lower Detection Limit Based on analyzer chosen
Short description This process adaption connects to a GPro 500 gas analyzer for installation in high particulate content gas streams.

Features and Benefits


Stable Measurement in Harsh Conditions
The filter probe type adaption for the GPro 500 tunable diode laser gas analyzer enables in situ gas measurement in dusty, high-temperature or high speed gas streams. It can be connected to the full range of METTLER TOLEDO TDL gas parameters for measurement.
Flexible and Consistent Platform
Reduced Lifecycle Maintenance Costs
A major cost of a gas analyzer is its maintenance-prone sampling and conditioning system. The filter probe does not require these systems and includes an integrated blow-out system to clean the filter without direct intervention or system downtime.
Fast, Intuitive Navigation
Simplified Installation & Reduced Costs
Typical TDL gas analyzers require significant planning and effort for alignment during installation in harsh gas streams. This need is removed by the non-purged filter probe process adaption. Eliminating the purging system also saves on utility costs.
Plug and Measure
For Combustion Control Applications
The non-purged filter probe adaption for the GPro 500 offers a unique solution for high dust or high temperature gas streams. Typical applications include flame-out detection using a CO gas analyzer, and combustion control in boilers and incinerators.
Easy Configuration

Documentation

Brochure

Gas Analytics Brochure
Safety, quality, productivity: that’s what’s most important to you. And that’s why our approach to designing analyzers and sensors is based around a s...

Booklet

Gas Analysis
In this free booklet we discuss the theory of absorption spectroscopy and how TDL analyzers are being employed in an increasing number of process and...
Complimentary eBooklet: Gas Applications for GPro 500 Analyzers
This eBooklet is intended as a convenient reference to a selection of the most common GPro 500 applications.

White papers

White Paper: TDLs for All Your Processes – Folded-Path Gas Analyzers
Our portfolio of folded-path tunable diode laser (TDL) gas analyzers now has a unique range of process adaptions. Combined, they have opened the door...
No More Purge Gas-New TDLs for Combustion Processes
This white paper explains how the new generation of TDLs not only offers exceptional fuel costs savings, but eliminates the need for process side purg...
Measurement of Oxygen Concentration
Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for protection against oxidation and explosion.
Inerting Made Efficient, Replacing Extractive Oxygen Analyzers
Manufacturing operations must keep output and quality their top priority. Switching from maintenance-intensive on-line extractive systems to a more re...
Measurement of Oxygen Concentration
Gaseous oxygen measurement with amperometric sensors is the most direct and easiest solution for protection against oxidation and explosion.
Polarographic Oxygen Measurement
For the measurement of oxygen in continuous process analysis, several technologies are available.
Minimizing Inerting System Maintenance
This white paper explains how TDL O₂ sensor can minimize inerting system maintenance & how to integrate them into a DCS system for fully automated oxy...
Gas Analysis Made Easy
Tunable Diode Laser (TDL) oxygen sensors from METTLER TOLEDO unite the best elements of two technologies to form a highly dependable monitoring system...

Technical Specifications

Manuals

Safety Manual for TDLS GPro 500 - Tunable Diode Laser Spectrometer
This document contains information and safety instructions required to use the GPro 500 with direct analog output option in SIL environments.
Get Your Quote
Filter Probe Adaption for GPro 500
FDA
USP Class VI

Accessories

Get Your Quote
Filter Probe Adaption for GPro 500
FDA
USP Class VI
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.