A New Method for Corrosion Prevention - METTLER TOLEDO
White Paper

A New Method for Corrosion Prevention

White Paper

On-line Chloride and Sulfate Monitoring

White paper: On-line Chloride and Sulfate Monitoring by Microfluidic Capillary Electrophoresis
White paper: On-line Chloride and Sulfate Monitoring by Microfluidic Capillary Electrophoresis

The dangers of chloride and sulfate
Power plants continuously face corrosion caused by chloride and sulfate under high pressure water and steam conditions. Pitting, stress corrosion cracking and other forms of corrosion attack boiler and steam generator tubes, turbines and other key components in the steam-water cycle. Deposited corrosion causes additional losses through under-deposit corrosion, lowered efficiency and more frequent shutdowns for cleaning.

As a result, monitoring of chloride and sulfate at very low ppb limits is being specified as part of cycle chemistry guidelines and turbine warranty requirements.

Existing measurement technologies have their problems
Demonstrating compliance with these limits has been a challenge for power plants. With a lack of practical on-line measurement technologies, cycle chemistry guidelines have relied on inferred measurements such as cation and degassed cation conductivity. These are important techniques for monitoring water purity during startup, but do not quantify the concentration of chloride and sulfate ions.

Ion Chromatograph and Inductively Coupled Plasma technology provide the separation and sensitivity needed to measure chloride and sulfate at the re­quired low ppb levels. However, the cost of these instruments and the skilled person­nel required for their operation places them out of reach for most power plant budgets.

Reliable On-line Measurement
Microfluidic Capillary Electrophoresis technol­ogy provides a convenient, dependable method for trace-level chloride and sulfate monitoring. Discover how in our white paper.

White paper highlights:

  • The need for specific chloride/sulfate measurement
  • How existing measurement technologies fall short
  • Principle of microfluidic capillary electrophoresis
  • And more...

 
 
 
 
 
 
 
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.