Kinnerton invest in technology | METTLER TOLEDO
Case Study

Kinnerton secures a successful future with METTLER TOLEDO

Case Study

How Product Inspection Technology Helps to Manufacture Chocolate

Kinnerton is the UK’s largest independent manufacturer of chocolate and novelty confectionery. To stay ahead of today’s highly-competitive and increasingly-global marketplace, Kinnerton recently invested in METTLER TOLEDO Metal Detection and X-ray Inspection equipment. This investment will ensure that Kinnerton meets the latest supermarket codes of practice.

Site Engineering Manager Mike Gee explains: “Our decision to invest in new product inspection equipment wasn’t driven by a desire to resolve a contamination issue - because we simply didn’t have one! We wanted to have robust contamination detection systems in place which were capable of handling our current range of packaging, as well as coping with new and complex packaging formats in the future. This will ensure that we continue to comply with the latest supermarket codes of practice – so the decision was driven by a desire to future-proof the site".

 

UK Chocolate Manufacturer secures a successful future with METTLER TOLEDO Product Inspection Technology.

Anticipating Future Packaging Challenges

One of the main reasons for deciding to buy x-ray systems was that Kinnerton was in the process of launching a new range of products. One of these consisted of a net containing foil-covered chocolate balls. “We knew there was no other way we were going to detect contaminants in a net of foilcovered chocolate balls other than via x-ray inspection,” explains technical manager Nick Raby. “However, rather than simply buying an x-ray system for that particular line, we considered what kind of future packaging formats might evolve and what was the best system for coping with an increasingly wide range of formats. We also wanted to ensure that the equipment we purchased would give us the flexibility to pack any type of packaged products in the future.” After researching a wide range of systems, Kinnerton eventually decided to purchase an X33 x-ray system with an air-blast reject as well as four T Series ‘throat’ metal detectors.

Impressive METTLER TOLEDO Inspection Rates

“After spending a day trialling our new foil-wrapped chocolate balls, we were impressed with the X33’s ability to inspect between 30 and 80 net bags per minute, while maintaining detection sensitivity and a low level of false rejects,” says Nick Raby. “The X33 was installed at the end of an existing production line in 2014, and now works as a Critical Control Point (CCP), inspecting foilwrapped chocolate balls in net bags ranging in size from 45 grams up to 180 grams.” Both Mike Gee and Nick Raby were also delighted with the ease of the equipment’s installation.

Quality Assured With T Series Metal Detectors

“Any new metal detector had to operate in such a way that we could be sure of preserving the quality of our products,” says engineering manager Mike Gee. “So we chose METTLER TOLEDO’s T Series Metal Detectors for each of our bagging lines, because they had the smallest insertion size in the industry.“ T Series Metal Detectors are designed for use in vertical packaging applications. They are capable of detecting all metal contaminants, including non-magnetic stainless steel within ‘in-flight‘ product, prior to insertion into sealed packs. The metal detectors have now been installed on three bagging lines where they inspect a wide range of chocolate-coated products. 

Case Studies

BINA Increases Productivity and Ensures Product Safety
Comprehensive quality thinking at all levels and the use of state- of-the-art technologies including METTLER TOLEDO product inspection systems have...
Ensuring Optimal Food Safety and Quality Control
Riverside Natural Foods Ltd manufactures healthy snacks at its production facility in Concord, Ontario. The Canadian company explains how installing s...
La Provence Bakery Turns to Product Inspection Equipment
In 2016 La Provence purchased a new cookie line and turned to METTLER TOLEDO for their new inspection equipment to maximize their final product qualit...
Bell Food Group
An x-ray case study in which meat processor Bell Food Group ensures their burger patties are inspected for various foreign bodies, plus product errors...
Thank you for visiting www.mt.com. We have tried to optimize your experience while on the site, but we noticed that you are using an older version of a web browser. We would like to let you know that some features on the site may not be available or may not work as nicely as they would on a newer browser version. If you would like to take full advantage of the site, please update your web browser to help improve your experience while browsing www.mt.com.